jonboy

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • Avatar
    jonboy
    Member
    in reply to: Home > Pro upgrade can’t add PPP entry #237663
    jonboy wrote:
    was hoping someone else had come across this problem, seems odd it happens on both modems so either they are suitable for the upgrade or I am missing an important step, but if I am I have missed it twice!

    Jon

    That should have said…”…..so either they are NOT suitable for upgrade….”

    I’ve tried tonight upgrading the firmware from here, http://www.nzdsl.co.nz/software/alcatel/Default.htm but none of the variants will upload onto the modem without an error. I’m rapidly coming to the conclusion that as you say they cannot be upgraded.

    The main reason for trying the upgrade though was both modems refuse to connect to the isp. A UK usenet user said he had the same problem with this modem but converting to Pro version cured it.

    Thanks for the link I’ll check it out

    regards

    Jon

    Avatar
    jonboy
    Member
    in reply to: Home > Pro upgrade can’t add PPP entry #237662
    shai tsanani wrote:
    can you tell if it use pptp or pppoe?

    I don’t know if it does or not, I am following this article….. http://www.petri.com/upgrade_from_alcatel_speedtouch_home_to_pro.htm

    was hoping someone else had come across this problem, seems odd it happens on both modems so either they are suitable for the upgrade or I am missing an important step, but if I am I have missed it twice!

    thanks

    Jon

    Avatar
    jonboy
    Member
    in reply to: Home > Pro upgrade can’t add PPP entry #237661
    shai tsanani wrote:
    which modem do you use?

    are you configuring this from the modem home page or from windows xp?

    Hi

    I’m on XP sp2 and using a browser on 10.0.0.138 It’s a Alcatel Speedtouch Home but when I telnet it the software version comes up as KHDSAA.132 very different to the ver shown on the upgrade page example on this site (Gv8baa3.281)

    tnx

    Jon

    Avatar
    jonboy
    Member
    in reply to: Home > Pro upgrade can’t add PPP entry #237660

    Please is there someone in the UK that has done this upgrade??

    I have tried with two different units and fail each time at the create PPP entry.

    Would REALLY appreciate some feedback

    cheers

    Jon

Viewing 4 posts - 1 through 4 (of 4 total)