Albertwt

Forum Replies Created

Viewing 30 posts - 31 through 60 (of 421 total)
  • Author
    Posts
  • Avatar
    Albertwt
    Member
    in reply to: Upgrading ESX 4.1 into ESXi 5.1u1 caveats #317978

    Re: Upgrading ESX 4.1 into ESXi 5.1u1 caveats

    wullieb1;277102 wrote:
    Why does it have to be done outside business hours??

    vMotion all the required VM’s to another host and do the upgrade that way.

    How are you doing the upgrade? We done our upgrade to 5.0 using VUM. Very simple and easy to do.

    http://www.ivobeerens.nl/2011/08/18/upgrading-to-vmware-esxi-5/

    You can upgrade directly from ESX 4.0 to ESXi 5.1 so my preference would be the VUM route.

    Please ensure that you review the upgrade document, which I presume you already have, from VMware.

    http://pubs.vmware.com/vsphere-51/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-51-upgrade-guide.pdf

    No caveats that I can remember other than ensuring that any special changes that you have made are documented.

    Thanks for the clarification mate, but it’s bit risky to do the orchestrated upgrade from ESX 4.1 to ESXi 5.1 u 1, based on your comments, is it possible to evacuate the VM from one ESX host and then move it back once it is successfully upgraded to ESXi5.1 ?

    Avatar
    Albertwt
    Member
    in reply to: Upgrading ESX 4.1 into ESXi 5.1u1 caveats #317977

    Re: Upgrading ESX 4.1 into ESXi 5.1u1 caveats

    Yes Joe, I done that already, now the ESX 4.1 to ESXi 5.1 Update 1 must be done outside of the business hours.

    what are the caveats and pitfalls that I need to pay special attention into ?

    Avatar
    Albertwt
    Member
    in reply to: Upgrading ESX 4.1 into ESXi 5.1u1 caveats #317976

    Re: Upgrading ESX 4.1 into ESXi 5.1u1 caveats

    James Haynes;277082 wrote:
    disable DRS until you finish the upgrade. this will keep vSphere from wanting to move any hosts around while your trying to perform the update.

    i would be more concerned with licensing and backups. make sure you have the licenses needed to run everything BEFORE you start upgrading.

    secondly, make sure you have the the backup software to support backups. verify that it works with 5 prior…

    thats just off the top of my head…

    for what its worth.

    Thanks man for the quick reply, yes for sure I will go to the cluster setting to disable the HA & DRS, because I’m going to do the VM migration / evacuate from one host, and then put it into maintenance mode to do the manual bootable ISO ESXi migration.

    In the previous ESX to ESXi upgrade in some host, the VMhost cannot see some LUN on the array and also the booting took ages, that’s quite annoying.

    Avatar
    Albertwt
    Member
    in reply to: Exchange 2007 to 2013 #317975

    Re: Exchange 2007 to 2013

    Ossian;270671 wrote:
    I think this is the TechNet article David refers to: http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

    The preferred method is never, ever to go to ADSIEDIT, but try to do a repair install — this assumes the computer account for the old Exchange server is still available — and clear removal of an old Exchange server. This guarantees a cleanup while any hacking of registry or AD doesn’t!

    Hi,
    I’m about to do the same thing as well, so I wonder what could go wrong if somehow I accidentally deleted the wrong key ?

    Avatar
    Albertwt
    Member
    in reply to: Organization Checks FAILED in updating SP1 to SP3 #317974

    Re: Organization Checks FAILED in updating SP1 to SP3

    Ossian;270672 wrote:
    Exchange 2010, presumably?

    Have you checked the AD Schema Master role is available and can be reached from the Exchange server?

    Thanks for the reply mate, I have just realized that this was because of the Domain Controllers in my domain are all 32 bit Windows Server 2008, while all of my Exchange Server 2007 SP1 and the setup file that I downloaded is 64 bit only.

    After I downloaded and re-executed the 32 bit Exchange Server 2007 SP3 from one of the 32 bit Domain Controllers, it works fine now.

    Avatar
    Albertwt
    Member
    in reply to: Exchange SP3 RU 10 update from SP1 #317973

    Re: Exchange SP3 RU 10 update from SP1

    Ossian;270282 wrote:
    AFAIK no issues in updating as you propose — review the MS documentation first, though:
    http://technet.microsoft.com/en-us/library/ee221147(v=exchg.80).aspx

    CAS first is preferred, and upgrade all 4 in as close a timeframe as you can

    ok, in this case the upgrade must be done through command prompt fpr SP1-SP3 and then SP3 – SP3RU10 ?

    Avatar
    Albertwt
    Member

    Re: NLB Unicast Terminal Server is not working after one of the node is turned off ?

    yuval14;263159 wrote:
    Hi,

    Please provide us the following information:

    a. Network Switch configurations + vendor + model
    b. What is the host type that used to host the VMs?
    c. Is all the VMs run on the same host?

    A. CISCO switch… (forgot the model).
    B. VMware ESX 4.1
    C. No they are different.

    Avatar
    Albertwt
    Member

    Re: NLB Unicast Terminal Server is not working after one of the node is turned off ?

    joeqwerty;263154 wrote:
    Try removing both servers from the cluster and then recreate the cluster.

    yes already, that is what happening after I rejoin the NLB cluster.

    Avatar
    Albertwt
    Member

    Re: NLB Unicast Terminal Server is not working after one of the node is turned off ?

    Thanks Wullie, hopefully someone here can help me diagnosing this issue.

    Cheers.

    Avatar
    Albertwt
    Member
    in reply to: Deleting C:windowswinsxs content #317969

    Re: Deleting C:windowswinsxs content

    Yes,

    thanks to all for the reply.

    I guess it is not safe to delete it, so i will look for expanding the VM disk allocated to this system.

    Avatar
    Albertwt
    Member
    in reply to: Unicast Terminal Server network configuration #317968

    Re: Unicast Terminal Server network configuration

    Dumber;258992 wrote:
    Albert,

    ……..

    Anyhow, to respond to your question, I would set them in a separate VLAN. Then give both hosts there own IP addres in that VLAN for example 10.10.10.1 and 10.10.10.2. The NLB address will be from the same range. So for example the NLB address would be 10.10.10.10.
    Clients should then connect to the 10.10.10.10 address.

    Thanks for the reply Dumber, soin this case I shall use just one vNIC per server not two ?

    because I was under the impression that I must use 2x vNIC with one for heartbeat.

    Avatar
    Albertwt
    Member

    Re: Exchange Server mailbox migration to new Mailbox DB to shrink the whitespace on C

    Ossian;258724 wrote:
    I think you have it right:
    Create empty database
    Set up replication
    *GET USERS TO CLEAN UP MAILBOXES AND EMPTY DELETED ITEMS ETC*
    Move mailboxes
    Delete old database

    Yes that is what I was thinking should I create new storage group as above or just create new mailbox database within the existing storage group ? So in total there are two mailbox DB in this storage group but the additional mailbox DB is on another drive location.

    Would that be easier or I have to go long way using the steps that I described above?

    Avatar
    Albertwt
    Member

    Re: Exchange Server mailbox migration to new Mailbox DB to shrink the whitespace on C

    tehcamel;258712 wrote:
    .. why do you need to clear up the space on the disk???
    If there’s whitespace, exchange will use that first, so your store won’t grow..

    yes because the existing drive is about to become full with less than 1 GB free, so I need to do something before it hits the 0 bytes free.

    Avatar
    Albertwt
    Member

    Re: How to publish certain application to certain user in terminal server environment

    tehcamel;256776 wrote:
    yes.. use application publishing, based on group membership…

    so is this what you mean http://support.microsoft.com/kb/302430 ?

    Avatar
    Albertwt
    Member

    Re: How to publish certain application to certain user in terminal server environment

    tehcamel;256776 wrote:
    yes.. use application publishing, based on group membership…

    ok, so how do I package or put the installation file ?
    do I install the application first on the terminal server or configure it in the GPO ?

    Avatar
    Albertwt
    Member

    Re: Exchange Server Full backup doesn’t truncate the log size after migrating to new

    Because at the moment the database is mounted successfully but the CR replication status / storage group copy shown as FAILED in the Exchange Management Console.

    Do I need to create another / similar drive letter / name in the DR node to make sure the CCR replication is healthy again for the backup to truncate the log file size successfully ?

    Avatar
    Albertwt
    Member

    Re: Exchange 2007 SP1: CCR SummaryCopyStatus is Suspended with increasing CopyQueueLe

    FischFra;246065 wrote:
    Don’t worry, Upgrade-StorageGroupCopy can only be run on the passive node.

    I’m almost sure you get an error if trying to run it on the active node, but to make it clear I would run a test in a test environment.

    Thanks for the reply Fisch,

    However with the parameter “–DeleteExistingFiles” sounds dangerous because if it deletes the transaction log I won’t be able to recover the lost email messages in the databases.

    Avatar
    Albertwt
    Member

    Re: Exchange 2007 SP1: CCR SummaryCopyStatus is Suspended with increasing CopyQueueLe

    FischFra;239294 wrote:
    Almost impossible to answer your questions without knowing more about your installation.

    In order to work properly the copy status of all storage groups have to be healthy, so you have to continue the replication and watch what is happening then.

    ok, I suppose If I run this powershell line in the wrong node, what could be the possible result ?

    Get-StoragegroupCopyStatus | where {$_.summarycopystatus -like “suspended”} | Update-StoragegroupCopy –DeleteExistingFiles[/CODE]

    I’m worried if I selected or executed the script in the wrong node it would delete the mailboxes content.[CODE]Get-StoragegroupCopyStatus | where {$_.summarycopystatus -like “suspended”} | Update-StoragegroupCopy –DeleteExistingFiles[/CODE]

    I’m worried if I selected or executed the script in the wrong node it would delete the mailboxes content.

    Avatar
    Albertwt
    Member

    Re: How to implement Active-Active Cluster using Windows Server 2008 R2 MSCS ?

    Dumber;244909 wrote:
    There is no real ACtive/Active Clustering in MSCS.
    It can be done, but both will running a single instance of a process whereby they are each others failover.

    At least this is how I read it: http://technet.microsoft.com/en-us/library/cc767156.aspx

    Dumber thanks for the advice, however after reading that article, I found out that I can/should deploy Windows NLB (multicast) with Standard Edition instead as opposed to MSCS with Enterprise edition.

    cmiiw ?

    Avatar
    Albertwt
    Member

    Re: How to Check if the server object still in use / active in AD ?

    Rems;242961 wrote:
    When you check the lastlogon attribute, make sure to do this on every DC to find the most resent logon date time of the computer object.

    OldComp is by default using also the lastlogon attribute!
    When using the “-llts” switch then OldComp will use the lastLogonTimeStamp attribute. The lastLogonTimeStamp is a new attribute available only when the domain functional level is Windows Server 2003 or above. This attribute is unlike lastlogon replicated in Active Directory. However, it is only updated when the user logs on if the old value is more than 14 days in the past, that means the value can only be trusted if it is more than 14 days in the past [http://www.rlmueller.net/Last%20Logon.htm%5D.

    /Rems

    thanks for the suggestion mate.
    I appreciate your helps.

    Avatar
    Albertwt
    Member

    Re: List any Windows Services in the domain who use DOMAINAdministrator as service ?

    tehcamel;241319 wrote:
    excellent :)
    I guess i’m not as crap at scripting as I thought.. I’ll try and do some more on it today.. work out how tofilter it etc

    you are great man :-)

    here’s my updated script, feel free to modify or optimize it again if you wish.

    Get-QADComputer -OSName “Windows*Server*” | Where-Object { Test-Connection $_.Name -Count 1 -Quiet } | Foreach-Object{
    Get-WmiObject -namespace “rootcimv2” -Class Win32_Service -ComputerName $_.Name -Filter “StartName=’DOMAIN\Administrator'” | Select-Object SystemName,DisplayName,Name,startname,State
    } | Export-Csv C:services.csv[/CODE][CODE]Get-QADComputer -OSName “Windows*Server*” | Where-Object { Test-Connection $_.Name -Count 1 -Quiet } | Foreach-Object{
    Get-WmiObject -namespace “rootcimv2” -Class Win32_Service -ComputerName $_.Name -Filter “StartName=’DOMAIN\Administrator'” | Select-Object SystemName,DisplayName,Name,startname,State
    } | Export-Csv C:services.csv[/CODE]

    Avatar
    Albertwt
    Member

    Re: List any Windows Services in the domain who use DOMAINAdministrator as service ?

    Yes tehcamel,

    many thanks for the reply. This is what I’ve been looking for.

    Cheers !

    Avatar
    Albertwt
    Member
    in reply to: Exchange Server Mailbox manual cleanup investigation ? #317956

    Re: Exchange Server Mailbox manual cleanup investigation ?

    joeqwerty;240715 wrote:
    1. Leave the System Mailbox alone.

    2. Do you have Mailbox Database maintenence scheduled? If not, the mailboxes won’t be removed.

    3. Backing up the database will not reclaim disk space from the database. You need to perform an offline defrag to reclaim disk space from the database.

    Joe, From the database maintenance plan in the Mbx server, it seems that my maintenance window for DB is 12-4 AM while the full backup is running from 7:15 PM until 8 AM in the morning, i wonder if the full backup halts the mailbox maintenance process ?

    Avatar
    Albertwt
    Member
    in reply to: Exchange Server Mailbox manual cleanup investigation ? #317955

    Re: Exchange Server Mailbox manual cleanup investigation ?

    What’s the default tool included ?
    Is it using powershell ?

    The reason i ask is because it is never get deleted automatically.

    Avatar
    Albertwt
    Member
    in reply to: Exchange Server Mailbox manual cleanup investigation ? #317954

    Re: Exchange Server Mailbox manual cleanup investigation ?

    joeqwerty;240721 wrote:
    1. Yes. It’s a system mailbox and best to be left alone.

    2. You can check it on the properties of the mailbox database under server configuration. I would suggest running it before or after, but not during, your backup window.

    3. Yes, they won’t shrink on their own.

    ok, understood mate for option #1

    as for number 2, I have experimente and found a way to delete it forcefully from the system using this powershell:

    Get-MailboxStatistics -database “serverdatabase” | where {$_.disconnectdate -ne $null} | foreach {Remove-mailbox -database $_.database -storemailboxidentity $_.mailboxguid}[/CODE][CODE]Get-MailboxStatistics -database “serverdatabase” | where {$_.disconnectdate -ne $null} | foreach {Remove-mailbox -database $_.database -storemailboxidentity $_.mailboxguid}[/CODE]

    Avatar
    Albertwt
    Member
    in reply to: Exchange Server Mailbox manual cleanup investigation ? #317953

    Re: Exchange Server Mailbox manual cleanup investigation ?

    joeqwerty;240715 wrote:
    1. Leave the System Mailbox alone.

    2. Do you have Mailbox Database maintenence scheduled? If not, the mailboxes won’t be removed.

    3. Backing up the database will not reclaim disk space from the database. You need to perform an offline defrag to reclaim disk space from the database.

    thanks for the reply Joe,

    1. I guess I cannot or should not delete this mailboxes for some reason ?

    2. I assume it is automatically run in the background, where can I check this setting ? once I’ve found it what is the best time to schedule it because my Exchange full backup is taking everyday after 7:15 PM until 6 AM in the morning.

    3. ah, IC it is too risky then, so from my understanding the database files (.edb) can only grow larger but can’t shrink down eventhough there are some large mailboxes deleted (or archived into Symantec EV).

    Avatar
    Albertwt
    Member

    Re: How to make batch script to write in shared network directory ?

    georgeeye;240505 wrote:
    @echo OFF
    net use Z: [URL=”file://\serversharename”]\serversharename[/URL] /user:username password
    xcopy /e /v /y *.* Z:
    net use Z: /delete
    [/CODE]

    That will map your network share, copy your %computername% directories to the network share, and then delete the drive mapping.[/QUOTE]

    and also delete the batch script itself along with the result file ?
    my goal is to leave the servers with no footprints or trace.[CODE]@ECHO OFF
    net use Z: [URL=”file://\serversharename”]\serversharename[/URL] /user:username password
    xcopy /e /v /y *.* Z:
    net use Z: /delete
    [/CODE]

    That will map your network share, copy your %computername% directories to the network share, and then delete the drive mapping.

    and also delete the batch script itself along with the result file ?
    my goal is to leave the servers with no footprints or trace.

    Avatar
    Albertwt
    Member
    in reply to: Failover cluster cannot failover automatically ? #317951

    Re: Failover cluster cannot failover automatically ?

    gerth;240468 wrote:
    With or without a witness disk?

    with a witness (quorum) disk for sure.

    Avatar
    Albertwt
    Member
    in reply to: Failover cluster cannot failover automatically ? #317950

    Re: Failover cluster cannot failover automatically ?

    Yes it is two servers clusters.

    Avatar
    Albertwt
    Member
    in reply to: Failover cluster cannot failover automatically ? #317949

    Re: Failover cluster cannot failover automatically ?

    many thanks for the reply mate,

    however I’m sure that I the IP is static not by DHCP as from the IPCONFIG results below:

    Quote:
    From PrintServer01 (the Active Node)
    Windows IP Configuration

    Host Name . . . . . . . . . . . . : PrintServer01
    Primary Dns Suffix . . . . . . . : domain.com
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No
    DNS Suffix Search List. . . . . . : domain.com
    domain.com.au

    Ethernet adapter Local Area Connection* 8:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft Failover Cluster Virtual Adapter
    Physical Address. . . . . . . . . : 02-50-56-AE-29-23
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    IPv4 Address. . . . . . . . . . . : 169.254.1.183(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.0.0
    Default Gateway . . . . . . . . . :
    NetBIOS over Tcpip. . . . . . . . : Enabled

    Ethernet adapter Cluster Public Network:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Intel® PRO/1000 MT Network Connection
    Physical Address. . . . . . . . . : 00-50-56-AE-29-23
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    IPv4 Address. . . . . . . . . . . : 192.168.127.155(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    IPv4 Address. . . . . . . . . . . : 192.168.127.88(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    IPv4 Address. . . . . . . . . . . : 192.168.127.142(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    IPv4 Address. . . . . . . . . . . : 192.168.127.143(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    IPv4 Address. . . . . . . . . . . : 192.168.127.144(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.127.254
    DNS Servers . . . . . . . . . . . : 192.168.127.10
    192.168.127.11
    Primary WINS Server . . . . . . . : 192.168.127.10
    Secondary WINS Server . . . . . . : 192.168.127.11
    NetBIOS over Tcpip. . . . . . . . : Enabled

    Ethernet adapter Cluster Private Network:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Intel® PRO/1000 MT Network Connection #2
    Physical Address. . . . . . . . . : 00-50-56-AE-43-EC
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    IPv4 Address. . . . . . . . . . . : 10.184.2.2(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    NetBIOS over Tcpip. . . . . . . . : Disabled

    From [B]PrintServer02[/B]
    Windows IP Configuration

    Host Name . . . . . . . . . . . . : PrintServer02
    Primary Dns Suffix . . . . . . . : domain.com
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No
    DNS Suffix Search List. . . . . . : domain.com
    domain.com.au

    Ethernet adapter Local Area Connection* 8:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft Failover Cluster Virtual Adapter
    Physical Address. . . . . . . . . : 02-50-56-AE-5F-E5
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    IPv4 Address. . . . . . . . . . . : 169.254.2.86(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.0.0
    Default Gateway . . . . . . . . . :
    NetBIOS over Tcpip. . . . . . . . : Enabled

    Ethernet adapter Cluster Public Network:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Intel® PRO/1000 MT Network Connection
    Physical Address. . . . . . . . . : 00-50-56-AE-79-FA
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    IPv4 Address. . . . . . . . . . . : 192.168.127.172(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    IPv4 Address. . . . . . . . . . . : 192.168.127.119(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.127.254
    DNS Servers . . . . . . . . . . . : 192.168.127.10
    192.168.127.11
    Primary WINS Server . . . . . . . : 192.168.127.11
    Secondary WINS Server . . . . . . : 192.168.127.10
    NetBIOS over Tcpip. . . . . . . . : Enabled

    Ethernet adapter Cluster Private Network:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Intel® PRO/1000 MT Network Connection #2
    Physical Address. . . . . . . . . : 00-50-56-AE-77-8D
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    IPv4 Address. . . . . . . . . . . : 10.184.2.3(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    NetBIOS over Tcpip. . . . . . . . : Disabled[/CODE][CODE]From PrintServer02
    Windows IP Configuration

    Host Name . . . . . . . . . . . . : PrintServer02
    Primary Dns Suffix . . . . . . . : domain.com
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No
    DNS Suffix Search List. . . . . . : domain.com
    domain.com.au

    Ethernet adapter Local Area Connection* 8:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft Failover Cluster Virtual Adapter
    Physical Address. . . . . . . . . : 02-50-56-AE-5F-E5
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    IPv4 Address. . . . . . . . . . . : 169.254.2.86(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.0.0
    Default Gateway . . . . . . . . . :
    NetBIOS over Tcpip. . . . . . . . : Enabled

    Ethernet adapter Cluster Public Network:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Intel® PRO/1000 MT Network Connection
    Physical Address. . . . . . . . . : 00-50-56-AE-79-FA
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    IPv4 Address. . . . . . . . . . . : 192.168.127.172(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    IPv4 Address. . . . . . . . . . . : 192.168.127.119(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.127.254
    DNS Servers . . . . . . . . . . . : 192.168.127.10
    192.168.127.11
    Primary WINS Server . . . . . . . : 192.168.127.11
    Secondary WINS Server . . . . . . : 192.168.127.10
    NetBIOS over Tcpip. . . . . . . . : Enabled

    Ethernet adapter Cluster Private Network:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Intel® PRO/1000 MT Network Connection #2
    Physical Address. . . . . . . . . : 00-50-56-AE-77-8D
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    IPv4 Address. . . . . . . . . . . : 10.184.2.3(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    NetBIOS over Tcpip. . . . . . . . : Disabled[/CODE]

Viewing 30 posts - 31 through 60 (of 421 total)