Using different connector Share on Facebook Tweet on Twitter Share on LinkedIn Home › Forums › Messaging Software › Exchange 2000 / 2003 › Using different connector This topic contains 2 replies, has 3 voices, and was last updated by joeqwerty 4 years, 5 months ago. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts galboriMember March 31, 2015 at 8:56 am #165116 Exchange 2003. I’ve two different smarthost. The first one is used to send email from entire domain I would like to use the second to send email from one specific user I’ve set two connector one for each smarthost, but I don’t know how can I force that user to use the second connector? (and if it’s possible) OssianModerator March 31, 2015 at 9:05 am #190466 Re: Using different connector Been a long time, but IIRC you set the cost of the more restrictive smarthost to be cheaper than the regular one, so Exchange will try to use one before the other, failing over if has to. joeqwertyModerator March 31, 2015 at 11:47 am #304407 Re: Using different connector Along with what Tom stated, you have to set the Delivery Restrictions on the SMTP connector to reject messages from everyone except the user in question. Take note that all outbound email will be evaluated against this SMTP connector so it may impose a performance impact on outgoing email. Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.