rebuild Default Web Site

Home Forums Server Operating Systems SBS 2000 / 2003 / 2008 / 2011 rebuild Default Web Site

This topic contains 4 replies, has 5 voices, and was last updated by Avatar jramirez 7 years, 3 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
  • Avatar

    i have sbs 2003
    and when i try t brows into the Default Web Site
    i have a error

    Most likely causes:

    • You are not connected to the Internet.
    • The website is encountering problems.
    • There might be a typing error in the address.

    What you can try:

    bullet.png Check your Internet connection. Try visiting another website to make sure you are connected.

    bullet.png Retype the address.

    bullet.png Go back to the previous page.

    down.png More information

    This problem can be caused by a variety of issues, including:

    • Internet connectivity has been lost.
    • The website is temporarily unavailable.
    • The Domain Name Server (DNS) is not reachable.
    • The Domain Name Server (DNS) does not have a listing for the website’s domain.

    i try to brows from the iis/local host name server
    all with the same error

    exchange(owa) is not loading

    but the crm is working

    i try to use this web page

    same resolute

    please advice


    Re: rebuild Default Web Site

    I had a similar problem with a web site on a server.

    1. Open IIS Manager
    2. Select Web Page tab
    3. Change IP address to All unassigned
    4. If the web site also has 443 (SSL) configured, click on Advanced tab and make sure IP addresses for 443 is also set to All Unassigned
    5. Stop/start default web site or www service.


    Re: rebuild Default Web Site

    many thanks for your help
    but it didnt help

    when i browse into the default web page i have error to display
    when i open index.htm with the browser i have my company web page


    Re: rebuild Default Web Site

    UTFW. Server Management –> Internal Web Site

    If you can’t fix it from there, post back with the errors.


    Re: rebuild Default Web Site

    And moved to SBS forum….

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.