Port Turn Amber Then Green After Replug in.

Home Forums Networking General Networking Port Turn Amber Then Green After Replug in.

This topic contains 1 reply, has 2 voices, and was last updated by Avatar ikon 10 years, 11 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Avatar
    nxerx
    Member
    #139594

    Hi,

    Please assist. I have a Cisco 3650G switch. It happens that the port that connects to the Network will suddenly turn Amber. When I plug out and in the cable from the port, it turns back Green. Besides that, I am running on STP algorithm. Really appreciated if anyone could help. Thank you.

    Cheers.

    Avatar
    ikon
    Member
    #354201

    Re: Port Turn Amber Then Green After Replug in.

    Youll need to console in or use ssh to check the status of the port at the time it is amber, i used to have a similar problem if i run a hub of of one of the ports and occasionaly the port would be disabled because of the nature of the hub.

    the port should go amber for a few seconds when you first plug in a device due to STP, unless you have disabled spanning-tree.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.