Outlook Web Access – IP assign Share on Facebook Tweet on Twitter Share on LinkedIn Home › Forums › Messaging Software › Exchange 2000 / 2003 › Outlook Web Access – IP assign This topic contains 1 reply, has 2 voices, and was last updated by tehcamel 7 years, 11 months ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts rjn239Member April 5, 2011 at 12:46 pm #154117 Hello, I have Exchange Server 2003 installed on Windows Server 2003. I want to no is it possible to access Outlook Web Access by going to the IP address of my ISP and creating a route to the server? For example say my static IP address from my ISP is 220.127.116.11 Can I set it up so I can go to h ttp://18.104.22.168/Exchange and it opens up my emails? How would I go about configuring this through my router and the server? Thanks, Ryan. tehcamelModerator April 5, 2011 at 1:33 pm #357158 Re: Outlook Web Access – IP assign you need to use your router to forward ports 443, 80, & 25 to your internal server. If you need to work out how to do this, you will need to review your router manual Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.