Migration from 2003 to 2010

Home Forums Messaging Software Exchange 2007 / 2010 / 2013 Migration from 2003 to 2010

This topic contains 4 replies, has 4 voices, and was last updated by Avatar Egyptian _Hacker179 7 years, 5 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • Avatar
    chovav
    Member
    #160283

    I have the following Exchange 2003 setup:
    1 backend EXG 2003 server, about 300 mailboxes, installed on a 2 node MS clister running Windows 2003.
    2 frontend EXG 2003 servers, accessable via the internet to provide OWA and mobile device access. Both are set in a Windows Load Balancing and seen as one node.

    I would like to move to EXG 2010 and need to know the following:

    1. which server roles are required to replace the existing servers
    2. I also need to have DR based on a diffrenet site that is connected to the main one over WAN

    Many thanks

    Chovav

    Avatar
    Sembee
    Member
    #260980

    Re: Migration from 2003 to 2010

    There is nothing unusual in your requirements.
    To replace like with like, at a minimum you would need four servers – two mailbox and two hub/cas.
    The two mailbox servers would be in a DAG.
    While you could use WNLB it isn’t recommended by the Exchange product team. For the number of users though, the solution I would be recommending two servers with all three roles, and then a hardware load balancer in front for client access.

    If you want HA locally then that is all that you need. If you want off site HA instead then you could locate two of the servers off site. If you want both, then it would be either three or six servers, two/four locally and the other two remotely.

    Simon.

    #384395

    Re: Migration from 2003 to 2010

    many thanks for the reply. we wiolo look at the options we have and decide on the number of servers.

    #384396

    Re: Migration from 2003 to 2010

    Another thing to ask: the EXG 2003 I have is on a 2 node MS cluster and both servers share an MSA2000 storage. With EXG 2010 + DAG where the 2 servers are on to seperate sites, I guess that local storage will be sufficient. Am I wrong?

    Avatar
    Ossian
    Moderator
    #187581

    Re: Migration from 2003 to 2010

    No, you are right — a DAG will work the same way with local or SAN storage — each member has a copy of the data

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.