event id 5719 netlogon

Home Forums Client Operating Systems Windows 2000 Pro, XP Pro event id 5719 netlogon

This topic contains 0 replies, has 1 voice, and was last updated by Avatar gogi100 9 years, 8 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • Avatar
    gogi100
    Member
    #146194

    I have a Windows 2003 network with 40 Windows XP workstations. on some workstations in the Event Viewer always get the messages in the morning when users turn on your computer
    Event Type: Error
    Event Source: W32Time
    Event Category: None
    Event ID: 29
    Date: 3.12.2009
    Time: 6:51:41
    User: N/A
    Computer: workstation
    Description:
    The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible. No attempt to contact a source will be made for 15 minutes. NtpClient has no source of accurate time.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Event Type: Warning
    Event Source: W32Time
    Event Category: None
    Event ID: 14
    Date: 3.12.2009
    Time: 6:51:41
    User: N/A
    Computer: workstation
    Description:
    The time provider NtpClient was unable to find a domain controller to use as a time source. NtpClient will try again in 15 minutes.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Event Type: Error
    Event Source: NETLOGON
    Event Category: None
    Event ID: 5719
    Date: 3.12.2009
    Time: 6:51:37
    User: N/A
    Computer: workstation
    Description:
    No Domain Controller is available for domain SOPETROVAC due to the following:
    There are currently no logon servers available to service the logon request. .
    Make sure that the computer is connected to the network and try again. If the problem persists, please contact your domain administrator.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 5e 00 00 c0 ^..À
    [/CODE]

    on a workstation issue, so I decided that I installed new drivers for a network card. However, the other computers I tried with new drivers, then
    [CODE]
    One possible cause of this error is that you have run out of buffer space in the NetBT datagram buffer. To resolve this problem, increase the MaxDgramBuffering value from 128 KB to 256 KB. Run Regedt32.exe, go to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesNetBTParameters.On the Edit menu, click Add Value, and then add the following information:
    Value Name: MaxDgramBuffering
    Data Type: REG_DWORD
    Value: 0x40000
    HKEY_LOCAL_MACHINESystemCurrentControlSetServicesNetlogonParameters
    Value Name: ExpectedDialupDelay
    Data Type: Reg_Dword
    Data Value is in seconds (default = 0)
    Data Range is between 0 and 600 seconds (10 minutes)
    [/CODE]

    but the problem is not solved. on these workstations yet, when morning users come to work in the Event Viewer appears this message

    I ask you whether you could give me some instructions?
    Thanks[CODE]Event Type: Error
    Event Source: W32Time
    Event Category: None
    Event ID: 29
    Date: 3.12.2009
    Time: 6:51:41
    User: N/A
    Computer: workstation
    Description:
    The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible. No attempt to contact a source will be made for 15 minutes. NtpClient has no source of accurate time.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Event Type: Warning
    Event Source: W32Time
    Event Category: None
    Event ID: 14
    Date: 3.12.2009
    Time: 6:51:41
    User: N/A
    Computer: workstation
    Description:
    The time provider NtpClient was unable to find a domain controller to use as a time source. NtpClient will try again in 15 minutes.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Event Type: Error
    Event Source: NETLOGON
    Event Category: None
    Event ID: 5719
    Date: 3.12.2009
    Time: 6:51:37
    User: N/A
    Computer: workstation
    Description:
    No Domain Controller is available for domain SOPETROVAC due to the following:
    There are currently no logon servers available to service the logon request. .
    Make sure that the computer is connected to the network and try again. If the problem persists, please contact your domain administrator.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 5e 00 00 c0 ^..À
    [/CODE]

    on a workstation issue, so I decided that I installed new drivers for a network card. However, the other computers I tried with new drivers, then

    One possible cause of this error is that you have run out of buffer space in the NetBT datagram buffer. To resolve this problem, increase the MaxDgramBuffering value from 128 KB to 256 KB. Run Regedt32.exe, go to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesNetBTParameters.On the Edit menu, click Add Value, and then add the following information:
    Value Name: MaxDgramBuffering
    Data Type: REG_DWORD
    Value: 0x40000
    HKEY_LOCAL_MACHINESystemCurrentControlSetServicesNetlogonParameters
    Value Name: ExpectedDialupDelay
    Data Type: Reg_Dword
    Data Value is in seconds (default = 0)
    Data Range is between 0 and 600 seconds (10 minutes)
    [/CODE]

    but the problem is not solved. on these workstations yet, when morning users come to work in the Event Viewer appears this message

    I ask you whether you could give me some instructions?
    Thanks[CODE]
    One possible cause of this error is that you have run out of buffer space in the NetBT datagram buffer. To resolve this problem, increase the MaxDgramBuffering value from 128 KB to 256 KB. Run Regedt32.exe, go to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesNetBTParameters.On the Edit menu, click Add Value, and then add the following information:
    Value Name: MaxDgramBuffering
    Data Type: REG_DWORD
    Value: 0x40000
    HKEY_LOCAL_MACHINESystemCurrentControlSetServicesNetlogonParameters
    Value Name: ExpectedDialupDelay
    Data Type: Reg_Dword
    Data Value is in seconds (default = 0)
    Data Range is between 0 and 600 seconds (10 minutes)
    [/CODE]

    but the problem is not solved. on these workstations yet, when morning users come to work in the Event Viewer appears this message

    I ask you whether you could give me some instructions?
    Thanks

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.

Register for this Petri Webinar!

Software-Defined Unlimited Backup Storage

Tuesday, August 27, 2019 @ 1:00 pm EDT

A Scale-Out Backup storage infrastructure is a must-have technology for your backups. In this webinar, join expert Rick Vanover for a look on what real-world problems are solved by the Scale-Out Backup Repository.

Register Now

Sponsored By