Do I need rpcnofrontend on an SBS 2003 server ? Share on Facebook Post on reddit Tweet on Twitter Share on LinkedIn Home › Forums › Server Operating Systems › SBS 2000 / 2003 / 2008 / 2011 › Do I need rpcnofrontend on an SBS 2003 server ? This topic contains 4 replies, has 2 voices, and was last updated by ASS-Ware 11 years, 7 months ago. Viewing 5 posts - 1 through 5 (of 5 total) Author Posts ASS-WareMember March 31, 2008 at 6:56 pm #131348 Hi All, As far as I know, the default setup of SBS 2003 works out of the box. But … on a normal Exchange 2003 server, to set up RPC over HTTPS, you need to change some registry settings, preferably with rpcnofrontend. Is this also needed on SBS 2003 R2 ? biggles77Spectator March 31, 2008 at 9:35 pm #208065 Re: Do I need rpcnofrontend on an SBS 2003 server ? No, just run the wizard. ASS-WareMember April 1, 2008 at 1:23 am #318672 Re: Do I need rpcnofrontend on an SBS 2003 server ? Thank you. ASS-WareMember April 1, 2008 at 2:00 am #318673 Re: Do I need rpcnofrontend on an SBS 2003 server ? biggles77;99257 wrote: No, just run the wizard. The tool reports “before” and “after” registry entries. Isn’t it weird that the “before” entries are different from what the tool says it should be ? ASS-WareMember April 1, 2008 at 3:10 pm #318674 Re: Do I need rpcnofrontend on an SBS 2003 server ? Still have a question about this. I have backed up my server (after I finally found the reverse). I ran the rpcnofrontend tool and this was in the LOG file : RPC Single Server Registry Modifications Coded by Harry Bates – [email protected]et – http://www.rocksystems.net KEY=HKEY_LOCAL_MACHINESOFTWAREMicrosoftRpcRpcProxy VALUENAME=ValidPorts PREVIOUS SETTING=servername:593;servername:6001-6002;servername:6004;servername.domain.local:593;servername.domain.local:6001-6002;servername.domain.local:6004 NEW SETTING=servername:6001-6002;servername.domain.local:6001-6002;webmail.mydomain.com:6001-6002;servername:6004;servername.domain.local:6004;webmail.mydomain.com:6004 Before I ran it, RPC over HTTPS worked. After I ran it, and rebooted the server, RPC over HTTPS still works. Which are the proper settings and what is the difference ? I realy hope somebody can tell me. Author Posts Viewing 5 posts - 1 through 5 (of 5 total) You must be logged in to reply to this topic.