DFS-R only one way is working

Home Forums Server Operating Systems Windows Server 2012 / 2012 R2 DFS-R only one way is working

This topic contains 6 replies, has 4 voices, and was last updated by  danielcriley 1 year ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts

  • Skateone
    Member
    #167309

    Hello ! it’s my first post on this forum.

    i have a weird issue.
    2 servers : 2012 and 2012 r2, one domain.

    between 2 offices i replicate through DFS-R 3 folders, but for one of them, the replication only works in one way (from 2012 r2 to 2012)
    for the 2 others folders, it works fine.

    the DFS Reports said a connectivity issue with ID 9032 (connection is shutting down) and event ID 5002 (on the 2012 r2 server)
    i increased the staging quota, i read a lot of post and also many webpage, like :

    https://social.technet.microsoft.com/Forums/windowsserver/en-US/68c4f402-6c77-4388-9701-51a4fc112964/error-1726-the-remote-procedure-call-failed-every-7-minutes-dfsr-backlogs?forum=winserverDS

    https://libyphilip.wordpress.com/2015/08/02/dfs-error-error-id-9032-the-connection-is-shutting-down-event-id-5002/

    From the DFS Replication Logs, i have a warning : 1726 the remote procedure call failed.

    to sump up, the 2012 r2 server is stopping communication with 2012 server…. why ?

    i am lost in DFS-R translation,
    thanks for your help.


    wullieb1
    Moderator
    #245709

    Have you tried to remove the replication and re-add it?


    danielcriley
    Member
    #391925

    yes i tried, i also set a primary server for the replication group (https://libyphilip.wordpress.com/201…event-id-5002/)

    i monitor the backlog with dfsrdiag backlog command line : dfsrdiag backlog /rgname:mydomainmycountryXXX /rfname:XXX /smem:xxxxx /rmem:yyyyyy

    it’s decreasing but so slowly….


    Ossian
    Moderator
    #191882

    What about time and bandwidth limitations?


    danielcriley
    Member
    #391926

    no speed limitation, and no schedule replication.
    sorry for replying with a little delay…


    danielcriley
    Member
    #391927

    i discovered a huge amount of datas in the “ConflictAndDeleted” folder, almost 9 GB


    danielcriley
    Member
    #391928

    hey guys !
    just to say that after 2 reboot from the sending server, i have no more backlogs.
    it’s not satisfactory. i don’t explain.

    so to sum up, i disabled replication and re enabled replication, i set as primary server the receiving server, i also rebooted both server many times, and then rebooted 2 times (2 days) the sending member.
    ++

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.