Any method to recover RAID 0 Data?

Home Forums Other General Hardware Any method to recover RAID 0 Data?

This topic contains 2 replies, has 3 voices, and was last updated by Avatar Anonymous 2 years, 9 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • Avatar
    zeebaluch
    Member
    #166820

    I have Dell T610 Server and configured RAID 0 on two disks. Unfortunately my one drive got dead I mean fully dead! I need to recover data from other disk, Is there any way to recover data from other disk? Please it’s important!

    Blood
    Blood
    Moderator
    #337251

    The data is split across both drives. Unlike some other forms of RAID there is no parity information stored on the disks in a RAID 0 array so recovering data when one disk fails is not possible. Do you have backups?

    https://en.wikipedia.org/wiki/Standard_RAID_levels#RAID_0

    Avatar
    Anonymous
    #372007

    If you didn’t back it up, it’s gone. RAID 0 might be fast, but it has no fault tolerance. Where a server has 2 discs, run them in a RAID 1 config (mirror), so that both discs are identical. If one fails, the other carries on while you get a replacement for the first.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.