2106 WLC iOS Share on Facebook Tweet on Twitter Share on LinkedIn Home › Forums › Networking › Cisco Routers & Switches How-to › 2106 WLC iOS This topic contains 2 replies, has 3 voices, and was last updated by Stevenjwilliams83 1 year, 9 months ago. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts eatyourcodeMember August 24, 2017 at 4:41 pm #167172 I bought this 2106 from ebay and I wanted to know if anyone has the last iOS released for this antique controller? I would greatly appreciate it. James HaynesMember August 26, 2017 at 4:08 pm #252113 the download link for the firmware you require can be obtained from the following site: https://software.cisco.com/download/…ease=220.127.116.11 you will need a logon for Cisco and will most likely require a non-enrolled serial number to create the logon if you dont already have one. thanks, James Stevenjwilliams83Member September 11, 2017 at 11:40 am #314348 You will be limited to AP hardware support and will only be able to support 6 APs total. It will also not run anything beyond code 7. https://www.cisco.com/c/en/us/products/collateral/wireless/2100-series-wireless-lan-controllers/prod_qas0900aecd805aaa9c.html Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.