Re: Cisco 857W NOT WORKING – DHCP NOT WORKING? – Please help

Home Forums Networking Cisco Routers & Switches How-to Cisco 857W NOT WORKING – DHCP NOT WORKING? – Please help Re: Cisco 857W NOT WORKING – DHCP NOT WORKING? – Please help


BigDeesDad
Member
#366382

Re: Cisco 857W NOT WORKING – DHCP NOT WORKING? – Please help

Your ATM0 and Dot11Radio0 interfaces are “shutdown” so you will need to enable these.

Access-list 102 is applied to the BVI1 interface which is denying everything so you will need to remove this.

Access-list 101 is also denying all traffic from the internet so you should amend that too. 101 should look more like this:

access-list 101 remark Traffic allowed to enter the router from the Internet
access-list 101 deny ip 10.0.0.0 0.255.255.255 any
access-list 101 deny ip 127.0.0.0 0.255.255.255 any
access-list 101 deny ip 169.254.0.0 0.0.255.255 any
access-list 101 deny ip 172.16.0.0 0.15.255.255 any
access-list 101 deny ip 192.168.0.0 0.0.255.255 any
access-list 101 deny icmp any any echo
access-list 101 permit ip any any
access-list 101 permit gre any any