Announcement

Collapse
No announcement yet.

p2v Issue

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • p2v Issue

    Has anyone had an issue, after you p2v a machine...it's fqdn or computername is not able to browsed through the network? Such as //somename/C$ ...but through IP it works.

  • #2
    Re: p2v Issue

    I have tried this method below, but it still does not resolve the issue:

    1. Click Start, click Run, type cmd.exe, and then press ENTER.
    2. Type set devmgr_show_nonpresent_devices=1, and then press ENTER.
    3. Type Start DEVMGMT.MSC, and then press ENTER.
    4. Click View, and then click Show Hidden Devices.
    5. Expand the Network Adapters tree.
    6. Right-click the dimmed network adapter, and then click Uninstall.

    Comment


    • #3
      Re: p2v Issue

      I just figured it out, the ESX host didn't have NTP setup. If the time is off by like 5 min from the domain time, everything gets all messed up.

      Comment

      Working...
      X