Please Read: Significant Update Planned, Migrating Forum Software This Month

See more
See less

Converter agent internal fault

  • Filter
  • Time
  • Show
Clear All
new posts

  • Converter agent internal fault

    Converting VMWare Server machine to Virtual Infrastructure Client ESXi 3.5 update 4 failed due to an internal error produced by the Converter agent.

    Error message:
    (converter.event.DiskCloneFailedEvent) {
    dynamicType = <unset>,
    key = 331,
    chainId = 315,
    type = "error",
    createdTime = "2009-05-04T09:10:24.866122Z",
    userName = "Administrator",
    fullMessage = "Failed to clone disk 5 on the virtual machine 'VMSAPBM5'.",
    vmName = "VMSAPBM5",
    sourceDisk = "5",
    reason = (converter.agent.internal.fault.NfcConnectionFault ) {
    dynamicType = <unset>,
    faultMsg = "File transfer failed.
    Dst error: Network error -- Failed to send header message",
    msg = "agent.internal.fault.NfcConnectionFault.summa ry"

    Also see logfile.

    This is what VMWare reports about this issue;

    Conversions of VMware Infrastructure virtual machine sources with 15 or more disks to any ESX destination managed by VirtualCenter 2.5 fail
    If you import a virtual machine source that resides on an ESX 3.5 host and the source machine has 15 or more VMDK files to ESX 3.5 destination managed by VirtualCenter 2.5, the conversion task fails with the following error message in Converter Standalone logs:
    FAILED: agent.internal.fault.NfcConnectionFault.summary
    To work around this issue:

    Convert the source machine to a hosted virtual machine destination, such as Workstation.
    Convert the resulting virtual machine to the ESX managed by VirtualCenter where you want it to reside.

    Also see link:

    Tried this solution, but when converting to ESXi platform Conversion Standalone tool 4 returns with same error, see above. VMWare Server 2 config had a total of 18 VMDK now converted to Workstation with 7 VMDK Files.

    Now trying a different ESXi 3.5 update 4 server, just to be sure. The first ESXi server has already 1 converted server with the same specs accept the ammount of VMDK files, only 5 instead of 7 (before 1.

    How to fix? Please advise.
    Attached Files
    Last edited by genera; 6th May 2009, 14:54.