Announcement

Collapse
No announcement yet.

Help with Hyper-V

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help with Hyper-V

    Hello:

    Please go easy here... Im new and am having an issue with Hyper-V setting up a test environment. The goal here is to have a single Hyper-V server running 4 VMs, in which 2 vm's will be on the same subnet and be visible to one another and be able to use the host's internet connection. Essentially what I am trying to create is two totally seperate lab setups for testing that are isolated from one another. The issue I am having is how to create all the parts in Hyper-V to make this happen. I have no problems creating VM's that use the host for internet when they are all on the same network. I have tried to implement RRAS to solve the problem but am not proficient enough yet to make it work. I have included a diagram of what I am working with. Any help would be appreciated!


    ----------
    - Inet -
    ----------
    !!
    !!
    ---------------
    - Router -
    - 192.168.1.1 -
    ---------------
    !
    !
    --------
    - Hub -
    --------
    !
    !
    ----------------------------------------------------------------------
    - Windows Server 2008 r2 -
    - 1 NIC (192.168.1.10/255.255.255.0) -
    - (second NIC available if needed -
    - Running Hyper-V -
    ----------------------------------------------------------------------
    ** ** ** **
    ** ** ** **
    -------- -------- ----------- --------
    VM #1 VM #2 VM #3 VM #4
    ADC ASERVER BDC BSERVER
    10.1.1.100 10.1.1.200 10.1.2.100 10.1.2.200
    255.255.0.0 255.255.0.0 255.255.0.0 255.255.0.0

    Thanks again in advance,
    Joseph
    Last edited by Joseph Anthony; 19th September 2011, 18:06.

  • #2
    Re: Help with Hyper-V

    Not quite sure what you are wanting to do. Do you want to have 2 VMs on the same network/subnet at the Host machine and the other 2 VMs on a different network/subnet?
    The below quote from your post shows the 4 VMs all on the same network/subnet, 10.1.0.0/16
    Originally posted by Joseph
    VM #1 VM #2 VM #3 VM #4
    ADC ASERVER BDC BSERVER
    10.1.1.100 10.1.1.200 10.1.2.100 10.1.2.200
    255.255.0.0 255.255.0.0 255.255.0.0 255.255.0.0
    To have 2 VMs on the same network as the Host machine you will need to change the Subnet Mask of the VMs.
    VM #1 VM #2 VM #3 VM #4
    ADC ASERVER BDC BSERVER
    10.1.1.100 10.1.1.200 10.1.2.100 10.1.2.200
    255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0
    The above puts the 2 x A VMs and the 2 x B VMs in different Networks. Are you wanting to have the different Networks to be able to "interact" with the Host machine or do you want them all to be seperated from the Host?

    Train Signal have an excellect Lab on Hyper-V training. This Lab will provide all the necessary training you will need to master Hyper-V and have it working its magic.
    1 1 was a racehorse.
    2 2 was 1 2.
    1 1 1 1 race 1 day,
    2 2 1 1 2

    Comment

    Working...
    X