Announcement

Collapse
No announcement yet.

Change Mass Storage Device Driver Post Server 2008 Installation

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Change Mass Storage Device Driver Post Server 2008 Installation

    Does anyone know how to change the Mass Storage Device Driver after Server 2008 has been deployed? We are using Server Profiles within Cisco's UCS and are changing the platform of our blades which requires a different driver. I do not want to completely rebuild the OS of the servers and am looking for other options.

    Please note that adding the driver to Device Manager does not work nor does booting to Safe Mode in an attempt to install it there. Any ides would be appreciated.

    Thanks,
    Last edited by cornhusker; 14th January 2013, 22:54.

  • #2
    Re: Change Mass Storage Device Driver Post Server 2008 Installation

    I would be tempted to say that if the driver doesn't work through device manager then it is the wrong one? What are you trying to add?
    cheers
    Andy

    Please read this before you post:


    Quis custodiet ipsos custodes?

    Comment


    • #3
      Re: Change Mass Storage Device Driver Post Server 2008 Installation

      I contacted Cisco and may have been using the wrong driver. I will update once I test with the new one.

      Thanks,

      Comment

      Working...
      X