No announcement yet.

after upgrade , problem with DNS and Ad

  • Filter
  • Time
  • Show
Clear All
new posts

  • after upgrade , problem with DNS and Ad

    hello, first of all sorry for my language i hope you can understand me
    Yesterday I did migration from server 2003 to 2008.
    I installed a new 2008 machine then I transferred the roles the removed the 2003 from my server ( it was virtual).
    The 2008 take the ip of 2003 ( but not the name
    2003 name =
    2008 name

    Now everything’s goes fine but at event viewer there is many errors , and when I restart the server it take long time to start.
    The errors :
    DNs =
    Log Name: DNS Server
    Source: Microsoft-Windows-DNS-Server-Service
    Date: 1/2/2012 11:53:38 AM
    Event ID: 7062
    Task Category: None
    Level: Warning
    Keywords: Classic
    User: N/A
    The DNS server encountered a packet addressed to itself on IP address The packet is for the DNS name "". The packet will be discarded. This condition usually indicates a configuration error.

    Check the following areas for possible self-send configuration errors:
    1) Forwarders list. (DNS servers should not forward to themselves).
    2) Master lists of secondary zones.
    3) Notify lists of primary zones.
    4) Delegations of subzones. Must not contain NS record for this DNS server unless subzone is also on this server.
    5) Root hints.

    AD =

    Log Name: Directory Service
    Source: Microsoft-Windows-ActiveDirectory_DomainService
    Date: 1/2/2012 11:52:27 AM
    Event ID: 1645
    Task Category: DS RPC Client
    Level: Error
    Keywords: Classic
    Active Directory Domain Services did not perform an authenticated remote procedure call (RPC) to another directory server because the desired service principal name (SPN) for the destination directory server is not registered on the Key Distribution Center (KDC) domain controller that resolves the SPN.

    Destination directory server:
    E3514235-4B06-11D1-AB04-00C04FC2DCD2/83ca7f34-d0d5-4898-80b1-5b3f[email protected]

    Thank you and sorry again …

  • #2
    Re: after upgrade , problem with DNS and Ad

    Sounds like problems with DNS and its getting itself confused.

    1. Open Network adapter and make sure its properties are set correctly and make sure that its own address is in the DNS list.
    2. Open cmd prompt and run IPCONFIG /RegisterDNS to re-register itself in DNS
    3. Open DNS Mgmt console and check everything:

    a) Make sure that the Host (A) address and reversable addresses and names are correct.
    b) At the root make sure that its own address is correct and names match and
    c) Check all SRV records are correct.
    d) Run the SETSPN on its account to fix any SPN errors.


    • #3
      Re: after upgrade , problem with DNS and Ad

      thnak you very match
      the problem was in DNS server ...
      i fixed root ,,,,,,, really thanx