Announcement

Collapse
No announcement yet.

VPN configuration help

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • VPN configuration help

    Hi guys,
    I am new in here, i need your help please.
    I got Server 2008 R2 as VPN server
    and an XP client both of them in the same workgroup not in domain only for studies purpose.

    if i dial up from the xp with private ip (192.168.2.100) it does connect but if i try to connect with spootnikb.myvnc.com address i get no response error.
    which public port should i open on my router to enable him to work with my lan.
    and how can i connect vpn outside my lan such as my work?
    thanks to all of you.

  • #2
    Re: VPN configuration help

    VPN ports are 1728 and 1702 IIRC
    Tom Jones
    MCT, MCSE (2000:Security & 2003), MCSA:Security & Messaging, MCDBA, MCDST, MCITP(EA, EMA, SA, EDA, ES, CS), MCTS, MCP, Sec+
    PhD, MSc, FIAP, MIITT
    IT Trainer / Consultant
    Ossian Ltd
    Scotland

    ** Remember to give credit where credit is due and leave reputation points where appropriate **

    Comment


    • #3
      Re: VPN configuration help

      hi ossian,
      thanks for the quick respond.
      i need to open those ports on the host?(xp) ip (192.168.2.101)
      or on the server ip(192.168.2.100)
      Best regards,
      Igor Bekerman

      Comment


      • #4
        Re: VPN configuration help

        Have you configured your router to pass the ports for the VPN 1723, 1701 and RADIUS - 1812, 1813 to the authentication server 192.168.2.100?
        A recent poll suggests that 6 out of 7 dwarfs are not happy

        Comment

        Working...
        X