Announcement

Collapse
No announcement yet.

error 0xc00002e1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • error 0xc00002e1

    greetings!

    i tried to ghost my hd to a new and larger one which is a dc. but after booting on the new hd it gives me this error

    0xc00002e1. i guess because of the cloning from C - D. i tried to boot using directory restore but i administrator cant login. help

  • #2
    Re: error 0xc00002e1

    You want to give us some more details or are we left guessing?

    What OS are your running?

    Did you remove the old HDD and connect the new one to the same channel?

    Did you change from IDE to SATA or SCSI?

    Does the BIOS support the larger drive

    Have you googled for your error message?

    Tom
    Tom Jones
    MCT, MCSE (2000:Security & 2003), MCSA:Security & Messaging, MCDBA, MCDST, MCITP(EA, EMA, SA, EDA, ES, CS), MCTS, MCP, Sec+
    PhD, MSc, FIAP, MIITT
    IT Trainer / Consultant
    Ossian Ltd
    Scotland

    ** Remember to give credit where credit is due and leave reputation points where appropriate **

    Comment


    • #3
      Re: error 0xc00002e1

      As Ossian has said we need alot more info from yourself.

      Server Specs would be a good place to start.

      OS version and ghost version also would help.

      What type of drive did you use and which drive are you trying to Ghost to??

      Was the system working before you tried the upgrade??

      Comment


      • #4
        Re: error 0xc00002e1

        its windows 2003 server. my new hd is a sata. what i used is norton ghost 2003. i tried the eval copy of acronis server 9.1. after removing my old if worked fine. no erros occured. thanks for your reply

        acronis is recommended as a backup tool

        Comment


        • #5
          Re: error 0xc00002e1

          Was your old drive SATA as well?

          Tom
          Tom Jones
          MCT, MCSE (2000:Security & 2003), MCSA:Security & Messaging, MCDBA, MCDST, MCITP(EA, EMA, SA, EDA, ES, CS), MCTS, MCP, Sec+
          PhD, MSc, FIAP, MIITT
          IT Trainer / Consultant
          Ossian Ltd
          Scotland

          ** Remember to give credit where credit is due and leave reputation points where appropriate **

          Comment


          • #6
            Re: error 0xc00002e1

            If you ghosted to a SATA drive after using an ATA drive then you will be missing the mass storage drivers for the SATA controller.

            You could get around this by installing the drivers before ghosting the drive. If i remember correctly the system will then boot up from the drive sucessfully. Its been a while since i done it though so i could be wrong.

            Comment

            Working...
            X