Announcement

Collapse
No announcement yet.

Win2k3 Routing Woes

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Win2k3 Routing Woes

    Would like to start by saying a very nice site you have here & that i'm new to all this networking & routing, just so u know !!

    Ok, now to the problem at hand.......

    I have a server running win2k3, with AD / DNS & DHCP installed.
    It has 3 nics installed...


    1) Normal 10/100 nic / 192.168.0.1

    2) Gigabit nic / 192.168.0.2

    3) Dvb nic / 192.168.238.238


    ( all have subnet mask of 255.255.255.0 )


    I have the server connected directly into my main pc, which also has a gigabit nic & the normal 10/100 nic is connected to a 3com 8-port switch.

    My problem is i cannot ping or see my main pc from a device connected via the switch. There just seems to be no routing there.
    I have used the win2k3 feature of "bridging" the 2 connections into one ip & this works fine, but would like it set-up with two seperate ip's for the nics.

    Dhcp works fine for all devices connected either directly ( main pc ) or via the switch, so i think it's just not routing properly.

    ( btw, i can't change the ip of the dvb nic, it has to stay on 192.168.238.238 )


    Many Thanks,

    Job

  • #2
    1) Normal 10/100 nic / 192.168.0.1
    2) Gigabit nic / 192.168.0.2
    Unless it's a typo, you need to put the NICs into different subnets.
    Guy Teverovsky
    "Smith & Wesson - the original point and click interface"

    Comment


    • #3
      No, it's no typo, as i said, i'm quite new to server & the whole network thing.

      So, if i understand u correctly, u mean something like...

      10/100 - 192.168.0.1

      10/100/1000 - 192.168.1.1

      ..Or am i completely lost & should read a book on the subject !!

      Thanks again,

      Job

      Comment


      • #4
        Can anyone help me with this ?? Want to try and fix it over the weekend.

        Thx,

        Job

        Comment


        • #5
          Originally posted by Job
          So, if i understand u correctly, u mean something like...

          10/100 - 192.168.0.1

          10/100/1000 - 192.168.1.1
          you understand antidot right.
          Marcel
          Technical Consultant
          Netherlands
          http://www.phetios.com
          http://blog.nessus.nl

          MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
          "No matter how secure, there is always the human factor."

          "Enjoy life today, tomorrow may never come."
          "If you're going through hell, keep going. ~Winston Churchill"

          Comment


          • #6
            Thx for the reply !

            Ok, can ping machines on either side of network now

            But, when i go into network neighbourhood on either the pc with gigabit lan or my laptop ( 10/100 ), i can only see that pc & the server, no other machines.

            So on the gigabit pc network neighbourhood, i see the gigbit pc & the server. but nothing else.

            And on the laptop ( 10/100 ), i can see the laptop & the server, but cannot see the gigabit pc.

            Is this because there on different networks ?? I tought that if they were part of the same domain & routing was working, then i should be able to see all machines on either the gigabit or the laptop.

            Please help me !!!

            Kind Regards,

            Comment


            • #7
              those are different subnets so you should do something on you're broadcasts..
              thats how network neigbourhood works. so, you can try to setup wins, and let hem register there...

              ow, btw... can you access the shares from the machine which isn't visable in you're network neigbourhood? (start --> run --> \\servername\c$)
              Marcel
              Technical Consultant
              Netherlands
              http://www.phetios.com
              http://blog.nessus.nl

              MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
              "No matter how secure, there is always the human factor."

              "Enjoy life today, tomorrow may never come."
              "If you're going through hell, keep going. ~Winston Churchill"

              Comment

              Working...
              X