Announcement

Collapse
No announcement yet.

using firewall in a domain environment

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • using firewall in a domain environment

    hello
    i cnat figure out something that seems to be obvious

    in my domain i have xpsp2 on the workstation.
    the defualt firewall is disable, like its should. no?

    i cant use telnet to them.
    and i need to configure a new port to be open,
    in the lan.

    thanks

  • #2
    Re: using firewall in a domain environment

    huh?
    please give more info about this.
    Marcel
    Technical Consultant
    Netherlands
    http://www.phetios.com
    http://blog.nessus.nl

    MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
    "No matter how secure, there is always the human factor."

    "Enjoy life today, tomorrow may never come."
    "If you're going through hell, keep going. ~Winston Churchill"

    Comment


    • #3
      Re: using firewall in a domain environment

      well u see

      in my network i use 10.0.0.x
      the network is protected by router and ipvpn
      so its likely i dont need every workstation to have its own firewall.

      so the firewall on those xpsp2 are disabled.
      and its seemed that i can communicate with them in any port.

      still telnet dont work.
      and a portscaner give a list of what open and what not

      where this configuration are controlled?

      thanks
      zavik

      Comment


      • #4
        Re: using firewall in a domain environment

        Have a read of the following and see if that will do what you want. http://www.jsifaq.com/SUBP/tip7900/rh7909.htm
        1 1 was a racehorse.
        2 2 was 1 2.
        1 1 1 1 race 1 day,
        2 2 1 1 2

        Comment

        Working...
        X