Announcement

Collapse
No announcement yet.

ISA Server 2k4 Template issue

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • ISA Server 2k4 Template issue

    I have installed Server 2k3, then ISA 2k4, then ISA SP1, then 2k3 SP1 and everything seems to be fine UNTIL I attempt to use the network template for a single network adapter. I receive an error stating that my system is out of resources and that the ISA server cannot load the property page due to lack of memory. The system has 1 GB RAM and nothing else is running, and I can't seem to find this explained or resolved anywhere. All of the other templates will load, just not the one I want.
    Just ofr giggles I reorded the installation and put it in 2k3, 2k3SP1, ISA, ISASP1 and got the exact same results.
    I am now attempting to put it onto another machine that exceeds the min requirements and will check to see if the template loads or not.

    Has anyone encounter this? Any insight would be appreciated.

  • #2
    Re: ISA Server 2k4 Template issue

    Did you review:

    http://www.isaserver.org/IsaNews/200...c13481349.html


    ?

    I will give you a short tips how to install servers in the future:

    1. Create bootable cd of Win 2003 with SP1 integrated.
    2. After Win 2003 with SP1 + drivers installation make a image
    for this server.
    3. Install the application and all the require hotfixes after review
    the release notes, warnning and common users feedback (You can
    even post a question in a forums - Is there known issue of installing
    X system by Y methood..

    Regards,

    Yuval
    Best Regards,

    Yuval Sinay

    LinkedIn: https://www.linkedin.com/in/yuval14, Blog: http://blogs.microsoft.co.il/blogs/yuval14

    Comment


    • #3
      Re: ISA Server 2k4 Template issue

      Yes, I have read that article as well as several others on that site, but have seen no relevance to my issue. I have posted this same topic there to no avail. I can install 2k3 ~ then any order of ISA & the service packs and it still will not load the single template that I require. I have even attempted to run the template prior to the installation of ANY service packs and get the same error.
      I can load any other template available, but just not the one I need (go figure).

      I am setting the ISA up to only publish OWA and a single secure website. I only need the forms based authentication offered up by ISA, and only need the single NIC configuration. We have an existing firewall system in place and have no intentions of replacing it with ISA, so the majority of answers I have received to my inquiries are not of any assistance.

      I have been dreading contacting MS Support regarding this, but after several searches and posts regarding this specific issue I have determined that there is little other available choices.

      As for installing servers, I have done this many times. I am far from a novice and understand slip streaming the service packs and re-burning the CD, which is of little relevance. What the issue I referenced was the memory error I was encountering when attempting to use the Single Network adapter template in ISA. At every step of installation I have created a ghost image of the system, so now I can easily revert to any step in the process and have the system running. I appreciate your advice.

      One note, when I ran the installation on a totally different box, I received the same error.

      Comment


      • #4
        Re: ISA Server 2k4 Template issue

        Please review:

        http://www.microsoft.com/technet/pro...edconfigs.mspx

        http://www.microsoft.com/technet/pro...started_3.mspx

        And I hope that you can add the snap of the error that you get to the forum.

        Thanx
        Best Regards,

        Yuval Sinay

        LinkedIn: https://www.linkedin.com/in/yuval14, Blog: http://blogs.microsoft.co.il/blogs/yuval14

        Comment


        • #5
          Re: ISA Server 2k4 Template issue

          I believe that I have revied these documents, but did once agian for the sake of it. I have read 2 books, and a billion blogs/posts/articles on ISA now and really cant recall what I have or have not read anymore . I did create a snap of the error which I have attached.

          This error appears as soon as the Single Network Adapter is selected, but does not occur for any of the other templates. 99% of all troubleshooting works with the configuration of ISA beyond this point. I cant even get to the parts that are apparently more problematic for others.

          Please note that the system is a Dell Optiplex GX280, P4 3GHz, 75GB Hard drive capacity partitioned out to C: 50GB ~ D: 25GB, and 1GB of RAM.

          There are no other applications running when the template error occurs, AND the task manager resources displays minima memory use.
          Attached Files
          Last edited by jeremie_ingram; 30th December 2005, 23:34.

          Comment


          • #6
            Re: ISA Server 2k4 Template issue

            If you using antivirus, try to remove it and reboot.
            Did the computer connect to the domain? If its on workgroup and you
            read:

            http://www.isaserver.org/articles/20...dowapart1.html

            http://www.isaserver.org/articles/20...dowapart2.html

            and it didnt helped you, please consider contact the PSS.

            Regards,

            Yuval
            Last edited by yuval14; 1st January 2006, 21:59.
            Best Regards,

            Yuval Sinay

            LinkedIn: https://www.linkedin.com/in/yuval14, Blog: http://blogs.microsoft.co.il/blogs/yuval14

            Comment


            • #7
              Re: ISA Server 2k4 Template issue

              Review this one http://support.microsoft.com/?id=290384
              Good Luck

              Shai

              MCSE 2003+Security;MCSE 2003+Messaging
              HP ASE;HP AIS;HP APS

              So, from me to all of you out there, wherever you are, remember:
              the light at the end of the tunnel may be you. Good Day!

              Comment


              • #8
                Re: ISA Server 2k4 Template issue

                First off, I would like to say thanks for the input towards this issue. It has been a real stumper for me to resolve, and I was just at the verge of calling MS on this incident.

                What happened was this...

                I set up the server in its own WORKGROUP, and was leaving it as a stand alone in the DMZ. Since it was not part of the network, and did not rely upon the network for any reason, I DID NOT CONNECT THE NIC. I was hoping to get it completed, then drop it into the DMZ and have it ready to roll. Once I plugged the NIC in, my teplate loaded without a hitch.
                Make this one up as end user level error, I cant believe I didnt figure this out alot sooner.

                Comment

                Working...
                X