Announcement

Collapse
No announcement yet.

Windows 2003 server routing problem

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Windows 2003 server routing problem

    We have two networks 192.168.0.0 and 192.168.6.0. The default gateway for the 192.168.0.0 is 192.168.0.254 (router housing the public ip). We have a Windows 20003 server that has two network cards. The ips on the nics are as follows:

    ip 192.168.0.7
    subnet mask 255.255.255.0
    default gateway 192.168.0.254

    ip 192.168.6.1
    subnet mask 255.255.255.0
    default gateway (currently blank)

    The router (192.168.0.254) has the following static route defined:
    route 192.168.6.0 255.255.255.0 192.168.0.7

    Problem: We cannot communicate from the 192.168.0. network back over to the 192.168.0.0 or to the internet. I think we need a static route defined on the Windows 2003 server to handle packets coming back in, but right now I am stumped. Any guidance would be appreciated.

    Will summarize. Thanks in advance.

  • #2
    Re: Windows 2003 server routing problem

    you can't just tell teh router to route 192.168.6.0 subnet to the windows 2003 server.

    it needs RRAS installed. Just a static route probably won't do it - it already KNOWS about the 192.168.6.0 network, it just doesn't know it's supposed to take packets from 192.168.0.0 and put them on 192.168.6.0
    Please do show your appreciation to those who assist you by leaving Rep Point https://www.petri.com/forums/core/im.../icon_beer.gif

    Comment


    • #3
      Re: Windows 2003 server routing problem

      RRAS is installed.

      Comment


      • #4
        Re: Windows 2003 server routing problem

        what happens if, from a device on the 192.168.0.0 network (NOT the server you specified) you try a traceroute to 192.168.6.1
        and what about to another host on the 192.168.6.0 subnet?
        Please do show your appreciation to those who assist you by leaving Rep Point https://www.petri.com/forums/core/im.../icon_beer.gif

        Comment


        • #5
          Re: Windows 2003 server routing problem

          I can ping successfully both ways, even out to the internet (4.2.2.2 from the 6.0 network), but I cannot access servers on the 192.168.0.0 network even though I can ping them and a traceroute shows it getting to them via 192.168.6.1.

          Comment


          • #6
            Re: Windows 2003 server routing problem

            right. now we're getting somewhere. It's not a routing problem if you can ping them.

            When you say you can't access the servers on 192.168.6.0 from 192.168.0.0 - how are you trying to access them ? what errors occur ?
            Please do show your appreciation to those who assist you by leaving Rep Point https://www.petri.com/forums/core/im.../icon_beer.gif

            Comment

            Working...
            X