Announcement

Collapse
No announcement yet.

Configuring RAID 10 in windows 2003

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Configuring RAID 10 in windows 2003

    Hi everyone,

    Please help me to configure RAID 10 on windows 2003. Please give me some useful links also.

    Thanks in advance ,

    Reeja.

  • #2
    Re: Configuring RAID 10 in windows 2003

    Hi,

    this is what i found :

    http://www.google.co.in/search?q=con...&start=10&sa=N



    Regards

    Comment


    • #3
      Re: Configuring RAID 10 in windows 2003

      What does this have to do with MS Exchange?

      Anyway, are you wanting to see if it's possible using the Windows software RAID with Dynamic disks, or do you have a hardware RAID controller ?

      Topper.
      * Shamelessly mentioning "Don't forget to add reputation!"

      Comment


      • #4
        Re: Configuring RAID 10 in windows 2003

        There no support for Raid 10 in Windows or Linux without third party tool etc.
        Its recommanded to buy Adaptec Raid adapter or use SAN to store the data.

        Regards,

        Yuval
        Best Regards,

        Yuval Sinay

        LinkedIn: https://www.linkedin.com/in/yuval14, Blog: http://blogs.microsoft.co.il/blogs/yuval14

        Comment


        • #5
          Re: Configuring RAID 10 in windows 2003

          Hi,
          Is there any Hard Disk monitoring tool available with Adaptec Raid adapter? I want to set up RAID 10.

          Any idea.
          Last edited by bijunn; 11th December 2005, 03:48.

          Comment


          • #6
            Re: Configuring RAID 10 in windows 2003

            Please review Adaptec web site -> support section.
            Not all the Raid adapters allow to setup Raid 10. Also, to use
            Raid 10 you will need at least 3 disks.
            Best Regards,

            Yuval Sinay

            LinkedIn: https://www.linkedin.com/in/yuval14, Blog: http://blogs.microsoft.co.il/blogs/yuval14

            Comment


            • #7
              Re: Configuring RAID 10 in windows 2003

              > Also, to use Raid 10 you will need at least 3 disks.

              More precisely, at least 4 and an even number.

              Comment


              • #8
                Re: Configuring RAID 10 in windows 2003

                Thanks for that..

                I have installed RAID 10.

                Comment


                • #9
                  Re: Configuring RAID 10 in windows 2003

                  RAID 10 needs at least 4 HDD.
                  what about Using RAID 1 with Compatible Mainboards which spports Hardware Raid.

                  Comment

                  Working...
                  X