Announcement

Collapse
No announcement yet.

allow workgroup DHCP in to connect to Domain subnet

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • allow workgroup DHCP in to connect to Domain subnet

    I am trying to use a workgroup DHCP server (2003) in a private subnet to NAT to a Domain subnet. The second NIC has a static address on the domain subnet. (It is identified as the ‘outside’ connection for NAT) The domain sees this as a rogue server and shuts down DHCP.
    My question – can I set up some type of filter to prevent the domain from seeing this DHCP server and still use the connection for NAT to access the DNS and internet? Or do I need to put a router in between? Thanks

  • #2
    Re: allow workgroup DHCP in to connect to Domain subnet

    You can disable rogue detection if you want to.

    http://support.microsoft.com/kb/297847/EN-US/

    Comment


    • #3
      Re: allow workgroup DHCP in to connect to Domain subnet

      thanks!

      I will read more on that. the DC is on WAN with several other servers, I am not sure this would need to be done on all servers and if so whether I want to do that


      Originally posted by wkasdo
      You can disable rogue detection if you want to.

      http://support.microsoft.com/kb/297847/EN-US/

      Comment


      • #4
        Re: allow workgroup DHCP in to connect to Domain subnet

        Originally posted by ~magill~
        thanks!

        I will read more on that. the DC is on WAN with several other servers, I am not sure this would need to be done on all servers and if so whether I want to do that
        I added the registery entry to the workgroup server, and that solved the issue of shutdown. I did not realize that the rogue server could disable the rogue server detection ?? but it works just fine

        thanks again

        ~MAGILL~

        Comment

        Working...
        X