No announcement yet.

system propertie error

  • Filter
  • Time
  • Show
Clear All
new posts

  • system propertie error

    i 've got a server with the os : Microsoft Windows 2003 Enterprise.
    i ve 12 of RAM (6*2 Go pc 2700 DDR ECC ) => 6 memory bar *2Go=12go
    my problem is :
    in system propertie , i see only : "3,25 Go of RAM"
    in MSINFO 32 : total physical memory : 12 288 Mo
    physical memory available : 2,77 Go
    total virtual memory : 8,35 go
    virtual mémory available : 7,44 go
    space for change file : 5,10 go
    in BIOS , it's ok ... Why i see only 3,25 go of RAM ?

    ps: i ve already put a post about this, but in this post i have attach more details. i have put 2 foto. ThanK's of your help.
    Attached Files

  • #2
    Milo, this is the third or forth topic you have started for this question. Why do you not use the REPLY button and keep all the information in the same place. It would also be helpful if when posting descriptions that we be advised if the language is anything other than English. Time was wasted trying to find out what Go was. Now it can be seen is was your language saying Gb.

    Is your server capable of using all the physical memory you have installed in it?
    Have you tried the switch mention in the following KB article?;en-us;283037

    You can also check out the following link, especially in the last post on the page. This is more for general information.;highlight=ram
    Joined: 23rd December 2003
    Departed: 23rd December 2015