Announcement

Collapse
No announcement yet.

Access denied to server

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Access denied to server

    Hello, everyone.
    I have 2 servers in cluster.These servers are DNS of themselfs.
    I'm using remote desktop to manage these servers.
    The problem is that I have access only to SRV1 and to the Cluster only if SRV1 is "owner".
    When I'm trying to access via remote desktop SRV2- it seems like server accept my username and password, but after couple of seconds I get alert that "access is denied".
    The same situation occures when I'm trying to access Cluster when SRV2 is "owner".

    I tryed to:
    1. check the registry on SRV2 ->remote desktop is enabled.
    2. tryed to use "dsc.msa". dragged SRV2 from the "Domain controllers" to Computers, then - gpupdate /force, restars to SRV2, and then dragg is back to "Domain Controllers".....
    And the same situation.

    I don't know what to do.
    The system is abroad.

    HELP!

  • #2
    Re: Access denied to server

    please help

    Comment


    • #3
      Re: Access denied to server

      Anything in the eventviewer of the servers?
      Marcel
      Technical Consultant
      Netherlands
      http://www.phetios.com
      http://blog.nessus.nl

      MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
      "No matter how secure, there is always the human factor."

      "Enjoy life today, tomorrow may never come."
      "If you're going through hell, keep going. ~Winston Churchill"

      Comment


      • #4
        Re: Access denied to server

        Yes.
        The "printscreens" attached...
        All problems and errors are from NODE2.
        This screenshots created on NODE1
        Attached Files

        Comment


        • #5
          Re: Access denied to server

          How have you setup DNS??

          Your DNS settings for both servers might not be correct. Are the DNS settings for each machine pointing to the other as the DNS server?

          If you have a third machine, make it your DNS server and in the DNS settings of SRV1 & SRV2, set them to the new DNS server. I bet this will work!
          |
          +-- JDMils
          |
          +-- Regional Systems Engineer, DotNet programmer & Jack of all trades
          |

          Comment


          • #6
            Re: Access denied to server

            Check you're DNS what JDmills suggested.
            When done; run a DCdiag and post it back.
            Marcel
            Technical Consultant
            Netherlands
            http://www.phetios.com
            http://blog.nessus.nl

            MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
            "No matter how secure, there is always the human factor."

            "Enjoy life today, tomorrow may never come."
            "If you're going through hell, keep going. ~Winston Churchill"

            Comment


            • #7
              Re: Access denied to server

              Thank you for your answers.
              I suppose the problem is because I changed SRV1 and SRV2 IP adresses.
              I have additional DNS mashine, but the problem is that I can not login to SRV2 in order to change DNS settings.
              I have posibility to LOGIN only to SRV1 via Remote.
              For shure that SRV1 pointing to the SRV2 as the additional DNS server, but SRV2, I suppose, pointing to SRV1 but with old IP.

              I need to LOGIN remotely to SRV2 in order to change settings, or there is some other way to solve it from SRV1?

              Comment


              • #8
                Re: Access denied to server

                Ahhmmmm......you can use SRV2's IP instead to RDP to it you know!

                You said "the problem is that I can not login to SRV2" but you have not stated what the error is. Need to know what error you are getting!
                |
                +-- JDMils
                |
                +-- Regional Systems Engineer, DotNet programmer & Jack of all trades
                |

                Comment


                • #9
                  Re: Access denied to server

                  Thanks guys
                  The probles solved-thank to DNSreset program.
                  I just used this program from SRV1, and changed IP's of DNS on SRV2.
                  Now I have access to SRV2 and DNS is working OK.

                  Thank you for your help.

                  Comment

                  Working...
                  X