Announcement

Collapse
No announcement yet.

No keyboard or mouse after Windows 2000 Server repair

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • No keyboard or mouse after Windows 2000 Server repair

    Hi everyone,

    In my testlab, I restore the system state of a HP Proliant DL380 G3 running w2ksp4 onto a DL380 G3 running w2ksp4 using this URL as a guide:
    http://support.microsoft.com/kb/263532

    After the reboot, Windows 2000 Server boots into the GUI mode of setup I have no mouse or keyboard and therefore cannot continue the installation.

    I've tried USB, PS2 keyboard/mice and KVM switch to no avail.
    Logged into recovery console, listsvc and checked i8042prt.sys is enabled.
    Both DL380's have a 6401 raid controller

    Hope a guru can point me in the right direction to resolve this issue.

    Thanks in advance.
Working...
X