Announcement

Collapse
No announcement yet.

srv 2000 as router

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • srv 2000 as router

    hi all

    i configure server 2000 as router
    between two intrenal network
    10.0.0.0 and 192.168.1.0

    i dont think i neew to do any thing
    in this configuration
    just start the service

    yet i did tried to add stsic route
    also didnt help

    i can ping from the router to both subnets
    yet cant ping from one subnet to anoter

    thanks

  • #2
    Re: srv 2000 as router

    Why aren't you using a router or a Layer 3 switch?
    It's much more faster.

    However, the client, what is the gateway? Do they point to the windows router?
    If not, did you add static routes to the clients or even better, did you add a route on the gateway?
    Marcel
    Technical Consultant
    Netherlands
    http://www.phetios.com
    http://blog.nessus.nl

    MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
    "No matter how secure, there is always the human factor."

    "Enjoy life today, tomorrow may never come."
    "If you're going through hell, keep going. ~Winston Churchill"

    Comment


    • #3
      Re: srv 2000 as router

      Hi,

      1. First, you do not need to add the static route on client.

      2. On the router, (I mean Windows machine only ) IP address of one NIC will be added in the default gateway of other. Ignore the warning that you will recieve while applying the same.

      e.g. You have two NICs A and B. IP of A is 10.0.0.1 and IP ob B is 192.168.1.1 then gateway for NIC A will be 192.168.1.1 and for NIC B it will be 10.0.0.1

      3. All the clients on 10.x network will point to 10.0.0.1 as Default gateway and clients on 198.168.1.x network will point to 192.168.1.1 for the same.

      4. Make sure your windows machine has been configured as router.

      It will work for sure.

      Regards,
      Kapil Sharma
      ~~~~~~~~~~~~~
      Life is too short, Enjoy It.

      Comment


      • #4
        Re: srv 2000 as router

        Sure it work work as I said it myself however it depends on the network setup.
        Marcel
        Technical Consultant
        Netherlands
        http://www.phetios.com
        http://blog.nessus.nl

        MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
        "No matter how secure, there is always the human factor."

        "Enjoy life today, tomorrow may never come."
        "If you're going through hell, keep going. ~Winston Churchill"

        Comment


        • #5
          Re: srv 2000 as router

          There is only one default gateway on a windows machine. The default gateway applies to the machine, not to a particular interface. I doubt that networking will work properly at all with the two interfaces having different default gateways configured.


          Tom
          For my own and your protection, I do not provide support by private message under any circumstances. All such messages will be deleted and ignored.

          Anything you say will be misquoted and used against you

          Comment


          • #6
            Re: srv 2000 as router

            Hi Marcel,

            I really did not mean that. I fully agree with you and was just trying to elaborate the options.

            Sorry If I conveyed it in wrong way.

            Thanks,
            Kapil Sharma
            ~~~~~~~~~~~~~
            Life is too short, Enjoy It.

            Comment


            • #7
              Re: srv 2000 as router

              Hi Kapil,
              I didn't seen it as an offence or so I wan't mad...
              Otherwise i would use the smiley
              Marcel
              Technical Consultant
              Netherlands
              http://www.phetios.com
              http://blog.nessus.nl

              MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
              "No matter how secure, there is always the human factor."

              "Enjoy life today, tomorrow may never come."
              "If you're going through hell, keep going. ~Winston Churchill"

              Comment

              Working...
              X