Announcement

Collapse
No announcement yet.

Do VLAN Routing using RRAS

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Do VLAN Routing using RRAS

    Hi

    we have two companies, both companies are bout to relocate into 1 building,

    Both companies have a Windows 2003 Servers both are on their own domains.

    Company1: has this configuration

    IP: 192.168.0.x
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.0.254
    DNS: 192.168.0.1

    Company2 : has this configuration

    IP: 192.168.100.x
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.100.21
    DNS: 192.168.100.2

    What I want to do is setup Remote Routing & Access using Windows 2003 to do VLAN.

    Company1: has the main internet connection what I want to do is make company2use the same net connection.

    I am wanting to know how I go about setting up RRAS & configuring NICS and RRAS to let Company2 access the net from company1. And also let the IT admins have access to company2 servers while on company1 network.

    I am after a guide / tutorial on how to set it up

    Thanks

    Matthew

  • #2
    Re: Do VLAN Routing using RRAS

    I'm not sure what you're goal is...

    However, RRAS is not Vlan aware.
    What you can do is use multiple nics and let the box route.
    But i think that a lolly pop (router on a stick) or a layer3 switch is easier to configure.
    Marcel
    Technical Consultant
    Netherlands
    http://www.phetios.com
    http://blog.nessus.nl

    MCITP(EA, SA), MCSA/E 2003:Security, CCNA, SNAF, DCUCI, CCSA/E/E+ (R60), VCP4/5, NCDA, NCIE - SAN, NCIE - BR, EMCPE
    "No matter how secure, there is always the human factor."

    "Enjoy life today, tomorrow may never come."
    "If you're going through hell, keep going. ~Winston Churchill"

    Comment

    Working...
    X