Announcement

Collapse
No announcement yet.

Jrnl_wrap_error

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jrnl_wrap_error

    Guys,

    Lately I've been receiving the above error in the form of a 13568 Event ID Error.

    I've done some reading on it and now know the background and the fix, but from what I've read it seems that the fix relys on the server replicating it's Journal from a peer. The problem is in my setup this is the only DC on the domain, so I don't see where it will replicate from.

    Has anyone had experiance of this error and can you tell me if the documented MS KB article would work on a single DC Domain.

    Cheers in advance

    Dean

  • #2
    Re: Jrnl_wrap_error

    Guys,

    Thought i'd share the solution with you, incase someone else has the same error in the future. Follow these steps from kb290762.

    To perform a nonauthoritative restore, stop the FRS service, configure the BurFlags registry key, and then restart the FRS service. To do so:
    1. Click Start, and then click Run.
    2. In the Open box, type cmd and then press ENTER.
    3. In the Command box, type net stop ntfrs.
    4. Click Start, and then click Run.
    5. In the Open box, type regedit and then press ENTER.
    6. Locate the following subkey in the registry:
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\NtFrs\Parameters\Backup/Restore\Process at Startup
    7. In the right pane, double-click BurFlags.
    8. In the Edit DWORD Value dialog box, type D2 and then click OK.
    9. Quit Registry Editor, and then switch to the Command box.
    10. In the Command box, type net start ntfrs.
    11. Quit the Command box.

    When the FRS service restarts, the following actions occur:
    The value for BurFlags registry key returns to 0.
    Files in the reinitialized FRS folders are moved to a Pre-existing folder.
    The FRS database is rebuilt.
    The member performs an initial join of the replica set from an upstream partner or from the computer that is specified in the Replica Set Parent registry key if a parent has been specified for SYSVOL replica sets.
    The reinitialized computer performs a full replication of the affected replica sets when the relevant replication schedule begins.

    If you still continue to recieve JRNL_WRAP_ERROR then you wil need to perform an Authoritive Restore. To do this simply follow the same procedure but enter "D4" in the reg key.

    Hope this helps.

    Dean

    Comment


    • #3
      Re: Jrnl_wrap_error

      Thanks for posting your solution Dean, it is appreciated!!
      11 was a racehorse.
      22 was 12
      1111 race 1 day
      22112


      ************************************************** * ************************************************** ***********
      ** Remember to give credit where credit is due and click the LIKE option in the bottom right corner **
      ************************************************** ************************************************** ****** * *****

      Comment

      Working...
      X