Announcement

Collapse
No announcement yet.

Routing Question

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Routing Question

    Hello All

    I would like to hide our hardware router(which connects us to the outside world and the current gateway for the server) on our internal network by pointing the clients to the server for internet traffic and have the server re-route traffic to the outside world via its gateway

    basically the rundown of what I want/have is as follows:
    1) Clients see the server as gateway (gateway/dns/ip assigned via dhcp)
    2) Server is the only one that sees router
    3) Server has 1 NIC

    I know I will need to use routing and remote access to provide NAT services but I need a little guidance to the right path

    thanks all in advance

  • #2
    Re: Routing Question

    Add second NIC to the server and configure appropriately.
    1 1 was a racehorse.
    2 2 was 1 2.
    1 1 1 1 race 1 day,
    2 2 1 1 2

    Comment


    • #3
      Re: Routing Question

      When Biggles77 says "configure appropriately" he means UTFW or run the CEICW! It does all the complicated stuff for you.
      Last edited by teiger; 24th January 2008, 12:04. Reason: typo
      TIA

      Steven Teiger [SBS-MVP(2003-2009)]
      http://www.wintra.co.il/
      sigpic
      Iím honoured to have been selected for the SMB 150 list for 2013. This is the third time in succession (no logo available for 2011) that I have been honoured with this award.

      We donít stop playing because we grow old, we grow old because we stop playing.

      Comment


      • #4
        Re: Routing Question

        Ah, err, yes, that's what I meant.
        1 1 was a racehorse.
        2 2 was 1 2.
        1 1 1 1 race 1 day,
        2 2 1 1 2

        Comment

        Working...
        X