Announcement

Collapse
No announcement yet.

HP PBR Question

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • HP PBR Question

    I am looking to add these 2 networks to the PBR policy. My question is how do i do this? Do i just add static routes then somehow assign those routes to the policy? Or do i go into the policy and add the routes there?

    10.10.130.0
    192.168.130.0

    to --->

    class ipv4 "Sonicwall_PBR"

    30 ignore icmp 0.0.0.0 255.255.255.255 192.168.2.0 0.0.0.255

    40 ignore ip 0.0.0.0 255.255.255.255 192.168.2.0 0.0.0.255

    50 ignore icmp 0.0.0.0 255.255.255.255 192.168.3.0 0.0.0.255

    60 ignore ip 0.0.0.0 255.255.255.255 192.168.3.0 0.0.0.255

    70 ignore icmp 0.0.0.0 255.255.255.255 192.168.17.0 0.0.0.255

    80 ignore ip 0.0.0.0 255.255.255.255 192.168.17.0 0.0.0.255

    90 ignore icmp 0.0.0.0 255.255.255.255 192.168.18.0 0.0.0.255

    100 ignore ip 0.0.0.0 255.255.255.255 192.168.18.0 0.0.0.255

    110 ignore icmp 0.0.0.0 255.255.255.255 192.168.19.0 0.0.0.255

    120 ignore ip 0.0.0.0 255.255.255.255 192.168.19.0 0.0.0.255

    130 ignore icmp 0.0.0.0 255.255.255.255 192.168.20.0 0.0.0.255

    140 ignore ip 0.0.0.0 255.255.255.255 192.168.20.0 0.0.0.255

    150 ignore icmp 0.0.0.0 255.255.255.255 192.168.100.0 0.0.0.255

    160 ignore ip 0.0.0.0 255.255.255.255 192.168.100.0 0.0.0.255

    170 ignore icmp 0.0.0.0 255.255.255.255 192.168.110.0 0.0.0.255

    180 ignore ip 0.0.0.0 255.255.255.255 192.168.110.0 0.0.0.255

    190 ignore icmp 0.0.0.0 255.255.255.255 192.168.120.0 0.0.0.255

    200 ignore ip 0.0.0.0 255.255.255.255 192.168.120.0 0.0.0.255

    210 match ip 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255

    220 match icmp 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255

    exit
    policy pbr "Sonicwall_PBR_Policy"

    10 class ipv4 "Sonicwall_PBR"

    action ip default-next-hop 10.10.10.253

    ex
Working...
X