Announcement

Collapse
No announcement yet.

How to Block P2P on Wireless ARUBA

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to Block P2P on Wireless ARUBA

    HI Member

    My Office user controller ARUBA Wireless but AP have 2 SSID for Office and for Guest. I need to block P2P (Bittorrent Utorrent) connect with SSID = Guid


    Please advide to me how to config controller
    Attached Files

  • #2
    Re: How to Block P2P on Wireless ARUBA

    Go into the Stateful Firewall section and look in there.

    Else is this any use??

    With specific firewall that some people may have not used you are better speaking to the manufacturer or the people whi supplied the equipment.

    Comment


    • #3
      Re: How to Block P2P on Wireless ARUBA



      Some config in Firewall
      Attached Files

      Comment


      • #4
        Re: How to Block P2P on Wireless ARUBA

        Does the manual give you any clues?

        What is the exact make and model of the WAP?
        Tom Jones
        MCT, MCSE (2000:Security & 2003), MCSA:Security & Messaging, MCDBA, MCDST, MCITP(EA, EMA, SA, EDA, ES, CS), MCTS, MCP, Sec+
        PhD, MSc, FIAP, MIITT
        IT Trainer / Consultant
        Ossian Ltd
        Scotland

        ** Remember to give credit where credit is due and leave reputation points where appropriate **

        Comment


        • #5
          Re: How to Block P2P on Wireless ARUBA

          Originally posted by Ossian View Post
          Does the manual give you any clues? i Have manual for new model.

          What is the exact make and model of the WAP?
          i user ARUBA 200

          Comment


          • #6
            Re: How to Block P2P on Wireless ARUBA

            I'm sorry i have no knowledge of these devices so i'm unable to help further.

            In essence though you want to either block the ports for torrents or block the applications themselves.

            Good luck.

            Try starting your search here

            http://www.arubanetworks.com/

            Comment


            • #7
              Re: How to Block P2P on Wireless ARUBA

              I've not used the devices either but it may be better to work based on what you allow rather than trying to allow all and then block.

              The basic config should usually start with everything denied then you can look at opening destination udp53 for DNS lookups (ideally just to your ISP DNS) and then destination port 80 and 443 to any destination (based on requirements). This would allow basic web traffic to work. You can then start opening more should you really require.
              cheers
              Andy

              Please read this before you post:


              Quis custodiet ipsos custodes?

              Comment


              • #8
                Re: How to Block P2P on Wireless ARUBA

                The basic config should usually start with everything denied then you can look at opening destination udp53 for DNS lookups (ideally just to your ISP DNS) and then destination port 80 and 443 to any destination (based on requirements). This would allow basic web traffic to work. You can then start opening more should you really require.
                This is the way I config firewalls. Only allow what you need outbound and let the explicit deny drop the rest. The problem is that p2p services sometimes try to tunnel over different protocols. To stop that you would need to do filtering at the application layer. (Deep packet inspection). I would check the documentation on that device or call their support.
                CCNA, CCNA-Security, CCNP
                CCIE Security (In Progress)

                Comment


                • #9
                  Re: How to Block P2P on Wireless ARUBA

                  How to config
                  Attached Files

                  Comment


                  • #10
                    Re: How to Block P2P on Wireless ARUBA

                    Is this a question or are you showing us how you have done it?
                    Tom Jones
                    MCT, MCSE (2000:Security & 2003), MCSA:Security & Messaging, MCDBA, MCDST, MCITP(EA, EMA, SA, EDA, ES, CS), MCTS, MCP, Sec+
                    PhD, MSc, FIAP, MIITT
                    IT Trainer / Consultant
                    Ossian Ltd
                    Scotland

                    ** Remember to give credit where credit is due and leave reputation points where appropriate **

                    Comment


                    • #11
                      Re: How to Block P2P on Wireless ARUBA

                      Originally posted by Ossian View Post
                      Is this a question or are you showing us how you have done it?

                      No i don't show, just i want config block P2P

                      Comment


                      • #12
                        Re: How to Block P2P on Wireless ARUBA

                        I really think if your having difficulty with this that you employ someone who is proficient in configuring these devices.

                        It looks like no of us here have configured these before.

                        Have you tried the Aruba support team??

                        Comment

                        Working...
                        X