Announcement

Collapse
No announcement yet.

Routing between subnets - will this work?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Routing between subnets - will this work?

    Will the way I setup my network and router to talk to multiple net cards on one PC
    from other PC on separate network work?


    First PC with two network cards

    First network card
    IP 192.168.3.106
    Sub 255.255.255.0
    Gateway 192.168.2.100

    Second network card
    IP 192.168.5.106
    Sub 255.255.255.0
    Gateway 192.168.2.100


    Router
    IP 192.168.2.100
    Sub 255.255.255.0

    Router table
    First route
    IP 192.168.3.0
    Sub 255.255.255.0
    Gateway 0.0.0.0
    Second route
    IP 192.168.5.0
    Sub 255.255.255.0
    Gateway 0.0.0.0

    Third route
    IP 192.168.6.0
    Sub 255.255.255.0
    Gateway 0.0.0.0


    Second PC
    First network card
    IP 192.168.6.106
    Sub 255.255.255.0
    Gateway 192.168.2.100


    I want to ping every network from each computer


    Software/Hardware used:
    windows, netgear router

  • #2
    Re: Routing between subnets - will this work?

    I don't mess with networking a lot, but the whole point of DG is to give access to outer networks and for that to work, your computer needs to be able to access the DG's IP. When you create a class C IP address and you give the DG an IP out of it's scope, it will not work.

    Let's take the first example:
    IP 192.168.3.106
    Sub 255.255.255.0
    Gateway 192.168.2.100

    The gateway should be 192.168.3.x or the IP of the PC should be 192.168.2.106
    Regards,
    Leonid

    MCSE 2003, MCITP EA, VCP4.

    Comment


    • #3
      Re: Routing between subnets - will this work?

      Yeah, I can't see why it shouldn't work theoreticaly. You have already got routes configured for the other subnets.
      Caesar's cipher - 3

      ZKHQ BRX HYHQWXDOOB GHFLSKHU WKLV BRX ZLOO UHDOLVH LW ZDV D ZDVWH RI WLPH!

      SFX JNRS FC U6 MNGR

      Comment

      Working...
      X