Announcement

Collapse
No announcement yet.

Networking Pass through traffic to different Connection

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Networking Pass through traffic to different Connection

    Hi Guys we have two sites Site A ( Main Office ) and Site B ( DR Office ) and I want to replicate one of our server to our DR office but will not pass through to our Main VPN connection. I want it to pass through to our Leased Line connection (Point to Point) during the replication, so it will not affect the bandwidth of our Main Connection. Kindly give me an idea regarding my problem. I also attached the network diagram that I have testing for couple of days but i did not work..
    Attached Files

  • #2
    Re: Networking Pass through traffic to different Connection

    Given my understanding of your network topology -AND- the fact that both servers have two NIC's... you could add a persistant static route on each server that points to the Cisco routers interface IP. I'm assuming both servers are windows based. Something like:
    Code:
    Left Server
    route -p add 192.168.201.0 mask 255.255.255.0 192.168.200.5
     
    Right Server
    route -p add 192.168.200.0 mask 255.255.255.0 192.168.201.2
    NOTE: The above implies that both Cisco routers have route entries (either dynamically learned or staic) for both 192.168.200 and 201 networks for reply traffic via the leased line interface IP, not the Juniper or Watchguard. Example:

    On the Left Cisco Router make sure there is a dynamic or static route something like the following:
    Code:
    ip route 192.168.201.0 255.255.255.0 10.200.187.130
    On the Right Cisco Router make sure there is a dynamic or static route something like the following:
    Code:
    ip route 192.168.200.0 255.255.255.0 10.200.187.129

    Comment


    • #3
      Re: Networking Pass through traffic to different Connection

      Hi scowles,

      I really appreciate your reply, I will try it tomorrow. all the traffic request for NIC 2 will pass through to cisco ethernet0 instead of passing through the gateway of NIC 1. great... sorry i really do not know how to add a route in windows server.. but right I learn something from you.


      Thank you very much...

      Comment

      Working...
      X