Announcement

Collapse
No announcement yet.

No syslog message from switch

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • No syslog message from switch

    I've set up a practice lab in GNS3 with a syslog server in DMZ. All devices (routers) successfully sends logging messages to the server ( Windows 2008 server with syslog watcher software).
    The switches have the exact same config as the routers:

    #logging host 200.20.16.165
    #logging facility local3
    #logging trap debugging

    I can ping from the switch to the syslog -server. /The dmz switch can successfully send logs, but not swtich s1s and e1s
    When I issue #show logging on the s1s switch I get:

    s1s#sh logging
    Syslog logging: enabled (11 messages dropped, 5 messages rate-limited,
    0 flushes, 0 overruns, xml disabled, filtering disabled)
    Console logging: level debugging, 53 messages logged, xml disabled,
    filtering disabled
    Monitor logging: level debugging, 0 messages logged, xml disabled,
    filtering disabled
    Buffer logging: disabled, xml disabled,
    filtering disabled
    Logging Exception size (4096 bytes)
    Count and timestamp logging messages: disabled

    No active filter modules.

    Trap logging: level debugging, 63 message lines logged
    Logging to 200.20.16.165(global) (udp port 514, audit disabled, link up), 63 message lines logged, xml disabled,
    filtering disabled




    //Lars
    ping to syslog server from switch s1s
Working...
X