Announcement

Collapse
No announcement yet.

Win98 two NIC

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Win98 two NIC

    Perhaps the issue is a bit offtopic but I have a problem that I can not resolved. I try it on a workstation, on which it is installed win98, set up two IP addresses of different subnets. One NIC is integrated and use it for LAN access (192.168.0.0/24) and the other NIC is to access another network (10.10.10.0/29).

    Configured settings only for LAN NIC are OK. For the other NIC are not.
    On the output of command ipconfig/all I see only IP for LAN NIC but for other NIC is 0.0.0.0 0.0.0.0

    where I'm wrong?

  • #2
    Re: Win98 two NIC

    Originally posted by BBKING View Post
    where I'm wrong?
    Choice of Operating System?

    Try this (not quite your scenario) as a start:
    http://www.duxcw.com/dcforum/DCForumID2/1585.html
    Tom Jones
    MCT, MCSE (2000:Security & 2003), MCSA:Security & Messaging, MCDBA, MCDST, MCITP(EA, EMA, SA, EDA, ES, CS), MCTS, MCP, Sec+
    PhD, MSc, FIAP, MIITT
    IT Trainer / Consultant
    Ossian Ltd
    Scotland

    ** Remember to give credit where credit is due and leave reputation points where appropriate **

    Comment

    Working...
    X