Please Read: Significant Update Planned, Migrating Forum Software This Month

See more
See less

Upload Image to Avaya AP-6 Access Point via TFTP

  • Filter
  • Time
  • Show
Clear All
new posts

  • Upload Image to Avaya AP-6 Access Point via TFTP

    I have an Avaya AP-6 Access point with no image and can currently serial into the bootloader CLI. I setup a TFTP server and and configured all the ip information. Downloaded the Image that i need firmware 2.4.11. I keep getting errors and the process never begins.

    The error from hyperterminal is below:

    Attached TCP/IP interface to dp unit 0
    Attaching interface lo0...done

    Hardware version 0.0.0 S/N : 04AT22580115

    Original Bootloader version 3.0.4 (0)

    Unable to Add the Default Route
    Downloading from network...
    Host Address, File Name AV_AP456.bin
    Transfer Timed Out.
    tftpGet: Error occurred while transferring the file.

    Downloading the image file failed AV_AP456.bin...

    Sending Traps to SNMP manager periodically

    Initial Setup Command Line Interface
    ================================================== =============
    Type help for a description on commands and parameters

    [bootloader] :

    Any suggestions? any help would be appreciated.