Announcement

Collapse
No announcement yet.

FAS270 Filer and Domain controller clocks are more than 5 minute apart.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • FAS270 Filer and Domain controller clocks are more than 5 minute apart.

    Hi All

    I am about to embark on NS0-163 exam in July. My friend has leant me his FAS270 Filer to familiarize myself with building a filer from scratch. I have hit a stumbling block already and would need some assistance please.

    Basically, I have built a Domain Controller called with AD and DNS called DIR.LOCAL, IP address of 192.168.0.100. I have added my new filer to DNS, its called GBIPS-I-FS1, IP address of 192.168.0.100. I have also added it to Computers in Active Directory.

    I then re-initialized the disks on the Filer to set up from scratch and went through the set up process till I got to the authentication aspect. Basically I have pasted the messages I am getting regarding Time services not configured on Filer, then filer and Domain Controller are five minutes apart.

    Would someone please give me some further assistance to get this filer configured, so I can be on my way to prepare for the exams. Any help will be valuable

    Thanks

    Manny

    Below is a summary of the message:


    GBIPS-I-FS1> cifs setup
    This process will enable CIFS access to the filer from a Windows(R) system.
    Use "?" for help at any prompt and Ctrl-C to exit without committing changes.

    Your filer does not have WINS configured and is visible only to
    clients on the same subnet.
    Do you want to make the system visible via WINS? [n]:
    A filer can be configured for multiprotocol access, or as an NTFS-only
    filer. Since multiple protocols are currently licensed on this filer,
    we recommend that you configure this filer as a multiprotocol filer

    (1) Multiprotocol filer
    (2) NTFS-only filer

    Selection (1-2)? [1]: 1
    CIFS requires local /etc/passwd and /etc/group files and default files
    will be created. The default passwd file contains entries for 'root',
    'pcuser', and 'nobody'.
    Enter the password for the root user []:
    Retype the password:
    The default name for this CIFS server is 'GBIPS-I-FS1'.
    Would you like to change this name? [n]:
    Data ONTAP CIFS services support four styles of user authentication.
    Choose the one from the list below that best suits your situation.

    (1) Active Directory domain authentication (Active Directory domains only)
    (2) Windows NT 4 domain authentication (Windows NT or Active Directory domains)
    (3) Windows Workgroup authentication using the filer's local user accounts
    (4) /etc/passwd and/or NIS/LDAP authentication

    Selection (1-4)? [1]: 1
    What is the name of the Active Directory domain? [DIR.LOCAL]:
    *** In Active Directory-based domains, it is essential that the filer's
    *** time match the domain's internal time so that the Kerberos-based
    *** authentication system works correctly. If the time difference between
    *** the filer and the domain controllers is more than 5 minutes,
    *** authentication will fail.Time services are currently not configured
    *** on this filer, and further, the Java system, which the time services
    *** depend on, is not enabled. We recommend that you enable Java on this
    *** system and then configure time services.
    In order to create an Active Directory machine account for the filer,
    you must supply the name and password of a Windows account with
    sufficient privileges to add computers to the DIR.LOCAL domain.
    Enter the name of the Windows user [[email protected]]: Administrator
    Password for Administrator:
    CIFS - unable to log into domain as
    [email protected].
    Please try again (Ctrl-C to exit).
    Enter the name of the Windows user [Administrator]:
    Password for Administrator:
    Could not authenticate with domain controller: Filer and Domain controller clocks are more than 5 minute apart. Filer and Domain Controller times must be synchronized in Windows 2000 domains.
    CIFS - unable to log into domain as
    [email protected].
    Please try again (Ctrl-C to exit).


  • #2
    Re: FAS270 Filer and Domain controller clocks are more than 5 minute apart.

    Hi,

    Are both systems on the same time zone?
    Have you enabled Java in there as suggested?

    Also, have a look in here on a similar problem as yours: http://www.experts-exchange.com/Stor..._23542669.html

    ***Might have to go to the above page through google and scroll down to the bottom for the answers*** Those Google crawlers can get everywhere
    Caesar's cipher - 3

    ZKHQ BRX HYHQWXDOOB GHFLSKHU WKLV BRX ZLOO UHDOLVH LW ZDV D ZDVWH RI WLPH!

    SFX JNRS FC U6 MNGR

    Comment


    • #3
      Re: FAS270 Filer and Domain controller clocks are more than 5 minute apart.

      Badoem, how exactly did you decide this thread belonged in the Wall of Fame Forum?

      I am moving this to General Networking until more info can help me or someone else decide where it should really be.
      1 1 was a racehorse.
      2 2 was 1 2.
      1 1 1 1 race 1 day,
      2 2 1 1 2

      Comment


      • #4
        Re: FAS270 Filer and Domain controller clocks are more than 5 minute apart.

        Why not configure one DC as an NTP server and point your NetApp filer (thus configure NTP) to that timeserver ?

        bio..

        Comment

        Working...
        X