Announcement

Collapse
No announcement yet.

2 Networks; 2 connections

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2 Networks; 2 connections

    I have my computer connected to two different networks. One connection is running through my ethernet card and the other through my wireless card. Configuration as follows:
    Ethernet - 192.168.1.104...subnet 255.255.255.0
    Wireless - 192.168.25.150...subnet 255.255.255.0

    Both networks are working fine. Both networks have an Internet connection that works on my computer.

    I want to block the Internet from my ethernet LAN but not the LAN connection. The Internet connection on the wireless network is faster, but my browsers keep defaulting to the ethernet card for Internet. How can I tell it to use LAN from both cards, but Internet only on Wireless?

  • #2
    Re: 2 Networks; 2 connections

    How about a default gateway on the wireless network and a static route to your LAN through the ethernet network?
    (OK, that wouldnt use both for the LAN)

    Could you post an IPCONFIG/ALL so we can get a better picture
    Tom Jones
    MCT, MCSE (2000:Security & 2003), MCSA:Security & Messaging, MCDBA, MCDST, MCITP(EA, EMA, SA, EDA, ES, CS), MCTS, MCP, Sec+
    PhD, MSc, FIAP, MIITT
    IT Trainer / Consultant
    Ossian Ltd
    Scotland

    ** Remember to give credit where credit is due and leave reputation points where appropriate **

    Comment

    Working...
    X