Announcement

Collapse
No announcement yet.

Connect two different network

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Connect two different network

    i have two different network. i.e 192.168.1.0 & 192.168.2.0

    i want communicate(file sharing and browser access) with this two network without router.

    i am using unmanaged switches only...

    any possibility for this?

  • #2
    Re: Connect two different network

    2nd nic or additional IP on a single nic.

    Comment


    • #3
      Re: Connect two different network

      i have 200 client computers boss....

      Comment


      • #4
        Re: Connect two different network

        Originally posted by spectrum007 View Post
        i have 200 client computers boss....
        Change your subnet masks to include both networks. Should be an easy change in your DHCP server.

        Maybe you should consider restructuring the network as well, but without more info about the topology, there isn't much advice to be given.

        -vP

        Comment


        • #5
          Re: Connect two different network

          Originally posted by vonPryz View Post
          Change your subnet masks to include both networks. Should be an easy change in your DHCP server.

          Maybe you should consider restructuring the network as well, but without more info about the topology, there isn't much advice to be given.

          -vP
          I may be wrong but I get the impression that IP addresses will be static as there are no routers and unmanaged switches.

          If not DHCP, then it would be a case of manually assigning the appropriate settings.

          Comment


          • #6
            Re: Connect two different network

            Originally posted by Virtual View Post
            I may be wrong but I get the impression that IP addresses will be static as there are no routers and unmanaged switches.

            If not DHCP, then it would be a case of manually assigning the appropriate settings.
            If there's no DHCP (unlikely) then it can be scripted.

            The smallest mask you can use so that 192.168.1.x and 192.168.2.x can talk without routing is 255.255.252.0 (aka /22) which would give you an IP range of 192.168.0.1 - 192.168.3.254 (1022 hosts)
            Regards,
            Jeremy

            Network Consultant/Engineer
            Baltimore - Washington area and beyond
            www.gma-cpa.com

            Comment

            Working...
            X