Announcement

Collapse
No announcement yet.

ST510 config

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • ST510 config

    Hi all,

    I'm using a Win2K Adv Srv configured as a PDC.
    It has two NICs: one for my private network and another one for the ST510.

    The default configuration I received from Bezeq requires me to use a PPP connection from my PDC - this has the effect of changing the IP of PDC to a dynamically assigned IP, leading to an unreachable PDC during the connection period and a lots of error events

    Any idea how to overcome this problem? Maybe, configuring the ST510 to automatically make a PPP connection to my ISP? How?

    Thanx,
    Adrian.

  • #2
    It is all in the manual, isn't it?

    Comment


    • #3
      Right!

      Comment


      • #4
        Configure your modem to work as router, remove DHCP, create NAT inside to needed ports.
        Memento Mori

        Comment


        • #5
          Oh, you are very smart!

          Consider the following question:
          "How to build a hydrogen bomb?"

          Answer:
          "You'll need about 10kg. of uranium, shape it into two parts, put those parts inside a big tank of pressurized hydrogen (you'll need isotope no. 2) and when you want to detonate it just attach the two uranium parts."

          Very simple! Where are the details?

          Thanks anyway. I have already built it (the network not the bomb) !

          Comment


          • #6
            Just browsing through several articles didn't killed anybody.
            You just needed to do 2 click from the main page.
            It is not really hard is it?
            Memento Mori

            Comment

            Working...
            X