Announcement

Collapse
No announcement yet.

Network Card Teaming

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Network Card Teaming

    Hi,

    I have a question about Network Card Teaming.

    I have several servers connected wit h2 network cards teamed.

    They are connected with 2gb on a Procurve 5308xl Switch.

    I get several errors.
    Excessive CRC / Alignment errors

    &

    Loss Of Link errors

    Does anyone know what to do? Maybe configure something on the switch?

  • #2
    Re: Network Card Teaming

    Originally posted by danny230681
    Hi,

    I have a question about Network Card Teaming.

    I have several servers connected wit h2 network cards teamed.

    They are connected with 2gb on a Procurve 5308xl Switch.

    I get several errors.
    Excessive CRC / Alignment errors

    &

    Loss Of Link errors

    Does anyone know what to do? Maybe configure something on the switch?
    1. Switch must support MLT (Multilink Trunk)
    2. MLT must be configured properly
    3. Spanning tree considerations must be taken care of.

    and that's a small piece of whole picture.

    Comment


    • #3
      Re: Network Card Teaming

      Ok, i will try that

      Comment

      Working...
      X