Announcement

Collapse
No announcement yet.

Urgent Help Needed with DHCP spoofing on Speedtouch 510

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Urgent Help Needed with DHCP spoofing on Speedtouch 510

    We have 4 Speedtouch 510 Modems attahced to a box that is supposed to do Point-to-Point line aggregation using a proprietary protocol called MPSEC.

    We need to send IPSec VPN packets through the box and out the modems, so the Modem's NAT is a problem.

    I actually need to remove NAT from the Modems and allow it to pass the Public IP through to the Box.

    I read your DHCP Spoofing article and that seems perfect but it uses a different version of Modem/Interface and therefore I am a little lost as to what to put where.

    If anyone has CLI commands to accomplish DHCP spoofing or another turorial using the Speedtouch 510 I'd really appreciate you sending it to me.

    [email protected]

    This is kind of urgent as we only have a few more days to test the aggregator and it is not working as yet.

    PLEASE HELP.
Working...
X