Announcement

Collapse
No announcement yet.

Upgrade an STH already upgradated to 510.....

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Upgrade an STH already upgradated to 510.....

    Hi all, I've a Speed Touch Home upgradated to Pro. The soft version are:

    Active software version : KHDSAA.270 (1003374)

    Passive software version : KHDSAA.134 (98834

    Can I upgrade it to 510?

    Thank you very much.

  • #2
    I Would to know also, if anyone knows, the best setting for the best performances, mainly ping time( I'm in PPPoA).

    Pheraps something in ip config?
    config : Get/Set forwarding/firewalling/...

    [forwarding={off|on}]
    [firewalling={off|on}]
    [redirects={off|on}]
    [sourcerouting={off|on}]
    [ttl=<number{0-255}>]
    [fraglimit=<number>]
    [defragmode={normal|always|nat}]
    Or what?

    Comment


    • #3
      Anyone there?

      Comment


      • #4
        Dead forum?

        Comment


        • #5
          Actually, I'm afraid it is...

          I cannot find the time to moderate this forum, and it seems that no one single bigshot can take it upon himself.

          It's a pitty, but I'll give it a chance.
          Cheers,

          Daniel Petri
          Microsoft Most Valuable Professional - Active Directory Directory Services
          MCSA/E, MCTS, MCITP, MCT

          Comment


          • #6
            Just answer to my question then....

            Comment


            • #7
              This will help you to upgrade to 510:

              http://petri.com/alcatel_upgrade_to_510.htm

              Comment


              • #8
                forum is almost dead -about sthold version

                but let us revive it
                let us meet here and solve difficult problems
                GORRO
                your STH cannot be upgraded
                I TRIED already
                like many other topics read www.petri.com carefully
                your STH firmaware version is too old
                gvc xxxx.xxx is newer
                k?? xxxxx is older
                you could recognize it by seeing what sockets you have the newer dont have atm -- looking like ETHERTNET socket so sorry try to swap with other guy that will never think of upgrading and works dialing from his PC
                goog luck
                write a follow up
                help revive the forum

                Comment


                • #9
                  I thought the upgrade to st510v3 is only possible with a firmware in this style: GV8BAA3.xxx and not with KHDSAA.xxx firmware. As far as I know you should do the upgrade with POTS only, not with an ISDN modem.

                  Comment

                  Working...
                  X