Announcement

Collapse
No announcement yet.

Cisco ASA 5510 - Port mapping

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cisco ASA 5510 - Port mapping

    Hi friends,

    i have a public ip 78.93.110.101 and i mapped with two ports 30000 & 30001 for accessing SAP application from outside of our network (Remote desktop is working)


    access-list 101 extended permit tcp any host 78.93.110.101 eq 30000
    access-list 101 extended permit tcp any host 78.93.110.101 eq 30001




    static (inside,outside) tcp interface 30000 10.10.3.6 30000 netmask 255.255.255.255
    static (inside,outside) tcp interface 30001 10.10.3.6 30001 netmask 255.255.255.255

    But still iam unable to access

    Looking forwrad to your response.

  • #2
    Re: Cisco ASA 5510 - Port mapping

    Did you apply the access-list? Is your server listening on tcp port 30000?



    access-group 101 in interface outside
    CCNA, CCNA-Security, CCNP
    CCIE Security (In Progress)

    Comment


    • #3
      Re: Cisco ASA 5510 - Port mapping

      yes i have already applied the access-list.How can i make sure that server listening on tcp port 30000?Can you please tell me how to configure ASA ASDM

      Comment


      • #4
        Re: Cisco ASA 5510 - Port mapping

        Your server should be listening on whatver default port it uses or whatever additional "custom" ports you specified. I would consult the documentation on that software.

        As far as ASDM just consult the cisco configuration guide for your model ASA and code version.
        CCNA, CCNA-Security, CCNP
        CCIE Security (In Progress)

        Comment

        Working...
        X