No announcement yet.

Site to Site VPN Routing problem on 5510

  • Filter
  • Time
  • Show
Clear All
new posts

  • Site to Site VPN Routing problem on 5510


    I'm really struggling to setup the routing through a site to site vpn to another site using subnet is a gateway that has access to the remote site. If I add to any server on the subnet 'route add mask' it is able to connect to any system on the subnet. However it doesn't work for computers connected via remote access vpn.

    I need to have all the servers on subnet have access to subnet and also any computer connected via remote access vpn to the 5510.

    Any suggestions would be much appreciated!

  • #2
    Re: Site to Site VPN Routing problem on 5510

    Note much info here except you mention an ASA 5510. I have no idea what device is doing what nor where they are. Is the site to site between 2 ASA's? Did you add that new subnet to your crypto acl on both sides and also add a nat exemption for it as well?

    same-security-traffic permit intra-interface enabled?
    CCNA, CCNA-Security, CCNP
    CCIE Security (In Progress)