Announcement

Collapse
No announcement yet.

PIX 515 6.3 and secondary IP's not working....

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • PIX 515 6.3 and secondary IP's not working....

    Hello all, have a small issue I can't seem to resolve...

    I believe I have the correct access-list and static mappings in place, and all mappings on the outside interface IP 75.xxx.xxx.129 work correctly. But as shown in my config below, the secondary mapping for 75.xxx.xxx.131 does not work. What am I missing?

    PIX Version 6.3(3)
    interface ethernet0 auto
    interface ethernet1 auto
    nameif ethernet0 outside security0
    nameif ethernet1 inside security100
    enable password xxxxxxx
    passwd xxxxxxxx encrypted
    hostname Pix
    domain-name xxxxx
    no fixup protocol dns
    no fixup protocol ftp 21
    no fixup protocol h323 h225 1720
    no fixup protocol h323 ras 1718-1719
    fixup protocol http 80
    fixup protocol pptp 1723
    no fixup protocol rsh 514
    no fixup protocol rtsp 554
    no fixup protocol sip 5060
    no fixup protocol sip udp 5060
    no fixup protocol skinny 2000
    no fixup protocol smtp 25
    no fixup protocol sqlnet 1521
    no fixup protocol tftp 69
    names
    access-list 101 permit icmp any any echo-reply
    access-list 101 permit icmp any any time-exceeded
    access-list 101 permit icmp any any unreachable
    access-list 101 permit tcp any host 75.xxx.xxx.131 eq www
    access-list 101 permit tcp any host 75.xxx.xxx.131 eq https
    access-list 101 permit tcp any host 75.xxx.xxx.129 eq 3389
    access-list 101 permit tcp any host 75.xxx.xxx.129 eq smtp
    access-list 101 permit gre any host 75.xxx.xxx.129
    access-list 101 permit tcp any host 75.xxx.xxx.129 eq pptp
    access-list 101 permit tcp any host 75.xxx.xxx.129 eq https
    access-list 101 permit icmp any host 75.xxx.xxx.129 echo-reply
    access-list acl_outbound permit ip any any
    pager lines 24
    mtu outside 1500
    mtu inside 1500
    ip address outside 75.xxx.xxx.129 255.255.255.248
    ip address inside 192.xxx.xxx.1 255.255.255.0
    ip audit info action alarm
    ip audit attack action alarm
    no pdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 1 0.0.0.0 0.0.0.0 0 0
    static (inside,outside) tcp 75.xxx.xxx.131 www 192.xxx.xxx.10 www netmask 255.255.255.255 0 0
    static (inside,outside) tcp 75.xxx.xxx.131 https 192.xxx.xxx.10 https netmask 255.255.255.255 0 0
    static (inside,outside) tcp interface smtp 192.xxx.xxx.9 smtp netmask 255.255.255.255 0 0
    static (inside,outside) tcp interface pptp 192.xxx.xxx.4 pptp netmask 255.255.255.255 0 0
    static (inside,outside) tcp interface 3389 192.xxx.xxx.2 3389 netmask 255.255.255.255 0 0
    static (inside,outside) tcp interface https 192.xxx.xxx.9 https netmask 255.255.255.255 0 0
    access-group 101 in interface outside
    access-group acl_outbound in interface inside
    route outside 0.0.0.0 0.0.0.0 75.xxx.xxx.134 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
    timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
    timeout uauth 0:05:00 absolute
    aaa-server TACACS+ protocol tacacs+
    aaa-server RADIUS protocol radius
    aaa-server LOCAL protocol local
    no snmp-server location
    no snmp-server contact
    snmp-server community public
    no snmp-server enable traps
    floodguard enable
    isakmp policy 10 authentication rsa-sig
    isakmp policy 10 encryption des
    isakmp policy 10 hash sha
    isakmp policy 10 group 1
    isakmp policy 10 lifetime 86400
    telnet 192.xxx.xxx.0 255.255.255.0 inside
    telnet timeout 60
    ssh timeout 60
    console timeout 0
    terminal width 80
    Cryptochecksum:23854ec0b8e1dd9fc01502bf86333fa0
    : end

    Any help on this would be greatly appreciated... I am sure it is some simple item I am overlooking... Thanks in advance!
    Last edited by ronwoods; 25th May 2011, 08:18.
Working...
X